Teracom Systems / Datalogning and conrol

Teracom Systems / Datalogning and conrol

Subcategories

  • Fjernkontrol via GSM
    <h1>Fjernkontrol og måling via GSM-mobilnet</h1> <p>De bruger GPRS, 3G og 4G (LTE) som de vigtigste kommunikationskanaler til GSM trådløse fjernforbindelser. De bruges ikke kun på steder uden Ethernet-forbindelse (LAN), men hvor der er særlige krav til obligatorisk tilslutning via mobilnet eller som en back-up forbindelse.</p> <p>Enheden til GSM-fjernovervågning via mobilnet har en indbygget WEB-server til nem opsætning. Opsætningen af ​​controlleren kræver ikke en særlig software.</p> <p>GSM-fjernovervågning overholder MTM-kommunikationsprotokoller som HTTP-post med XML/JSON-statusfiler og HTTP API-kommandoer. De kan indgå i systemer til dataindsamling og fjernbetjening, selvom de ikke har offentlig statisk IP-adresse. GSM-modulet kan også opsættes via SMS-kommandoer. GSM-enheder understøtter e-mail-klient med TLS-kryptering for at sende alarm via e-mail. Kan også sammen sendes som standard SMS. GSM-enheden har analoge indgange til DC-spændingsmålinger, digitale indgange samt relækontakter.</p> <p>GSM-enheden er velegnet til fjernovervågning og kontrol af faciliteter til mobilt udstyr, miljøovervågning i køretøjer samt overvågning af fødevarer mv.</p>
  • Sensorer og detektorer
    <h1>Teracom Sensorer og detektorer</h1> <p>Sensorer og detektorer er en vigtig komponent i ethvert system til fjernovervågning og kontrol. Sensorerne og detektorerne omdanner miljøparametre, så som temperatur, fugt, tryk etc. til elektriske signaler. Disse signaler overvåges af enheder, så som Ethernet-fjernovervågning eller GSM-fjernovervågning.</p> <p>Sensorerne kommunikerer med controllere til fjernovervågning via en digital grænseflade. Interfacet kan enten være 1-Wire eller RS485.</p> <p>1-Wire-grænsefladen er patenteret af Maxim Integrated Company. 1-Wire sensorer har eget ID og flere kan forbindes til samme bus. I dette tilfælde kan flere parametre overvåges af en enkelt controller. 1-Wire-grænsefladen er designet til at fungere over korte afstande, er den meget populær til hjemme- og kontorautomatisering.</p> <p>Sensorer med RS485 tillader også at der er flere sensorer bå samme bus. En RS485 bus kan være op til 1km lang. Sensorer med RS485 grænsefladen er egnet til støjende industrielle miljøer.</p>
  • DAQ software og værktøjer
  • Fjernkontrol over Ethernet
    <p>Remote control over Ethernet may be the measurement and control with separate module located where the measurement is to be collected. <!-- P--></p> <p>Ethernet remote monitoring provides a graphical user interface in the form of a web server and a M2M protocol, e.g. . MODBUS. They may be used in a stand-alone system or as part of a SCADA Systems. No need for special software to work with the devices. All settings and subsequent remote monitoring and control is a standard browser - Chrome, Firefox, IE, Opera, etc. <!-- P--></p> <p>TCW1xx units are simple tasks and do not have data logger function. TCW2xx units are with 32-bit chipset and supports 10 / 100MBit network. Everyone M2M protocols - Modbus TCP / IP, SNMP v2, HTTP API with XML / JSON status files and HTTP Post for client-server systems. They support TLS encryption for SMTP. Some data logger functionality and the user can view and retrieve log data via a standard browser. <!-- P--></p>
  • Produktkatalog

There are 44 products.

Showing 25-36 of 44 item(s)

Teracom monitor and data logger program, licensed to 1-10 units, Win7 / 8/10 - FREE

Product code: TC-MONITOR-10

Get your free license key from Teracom DAQ software for Teracom Ethernet-based measuring devices User-friendly WEB interface for easy configuration and control Flexible user access and management Distributed monitoring units in "client" fashion Alarm notification Activity log Graphics and data display with large visualization Easy access to raw data, tables, export in CSV format (comma separated) Database management Send command to check in "server" and "client" mode command status log

Call For Price

Price 0.00 DKK

4 channel S0 pulse counter with RTU MODBUS, RS485, S0 Standard 62053-31, to Teracom data loggers

Product code: TDI340

Remote collection of data, remote meter monitoring, energy management Energy Meter Interface Module with MODBUS RTU RS-485 interface with up to 63 units per BUS Built-in 120 ohm termination resistor Flash memory data and setup Power supply from 5 to 32VDC, 25mA at 5VDC Galvanic isolated digital input - 10mS pollinghastighed Optional inputs: Open / Closed (dry contact and 32 bit counter) S0 pulse counter applications : Remote monitoring of electricity meters Industrial process control Remote monitoring of gas meters and water meters monitoring devices with S0 outputs; process monitoring DIN rail mounting Firmware update via interface. Dim: 35 x 86 x 59 mm

Price 1,096.00 DKK

4G LTE alarm and remote control, M2M, IOT, data logger, I/O with digital and analog, relay, Modbus, 12 - 24VDC

Product code: TCG140-4E

Multi-band 4G LTE Cat.1 Controller, logger and alarm Setup via USB, SMS and HTTP API 2 digital "Dry Contact". High on contact 2 analog inputs, 0 - 10VDC - can be changed to 4-20mA input 2 analog inputs, 0 -10VDC or 0-20mA, 10bit (web control) 4 Relay outputs, COM, NO and NC 1-wire input for up to 8 Teracom sensors RS485 for max. 8 Modbus RTU sensors Data logger with memory for 70,000 logs Upload data for HTTP / HTTPS Post in XML / JSON SMS Alarm for max. 5 recipients Email Alarm for max. 5 recipients Control of relay output from call 10 to 28VDC, 370MA @ 12VDC - Buy PSU Dim: 158 x 119 x 34 mm Weight: 470g Temperature: -20 - +55°C

Price 2,750.00 DKK

Temperature and humidity sensor with RS485. -20 - +60°C, 5 - 95% RH. Modbus RTU. 12-16bit solution. IP65.

Product code: TSH330

RS485 Modbus RTU kombi sensor Temperatur: -20 - +60°C +/-0,6°C Opløsning: 0,1°C  Humidity (fugt): 5 - 95% rH +/- 5% Opløsning 0,1%rH IP65 plasthus, meget robust Op til 32 sensorer på samme RS485 bus 16 bit ved temperatur 12bit ved fugt Forsyningsspænding: 4,5 - 26VDC / 25mW Mål: 74 x 66 x 36 mm

Price 1,587.00 DKK

Light sensor of visible light. 0 - 83,000lux with 23bit solution. Automatic setting for optimal resolution. 1-wire interface

Product code: TSL200

1-wire lysmåler til synligt lys 0 - 83.000lux med 1 lux opløsning Op til 23bit opløsning Automatisk fuld skala justering Kan kaskadekoples via RJ11 stik Forsynes fra Controller med 5VDC/4mA Maks. 30 meter kabel Mål: 85 x 35 x 24 mm IP30 plasthus med flange

Price 817.00 DKK

Product title

Product code: TCG120-4E

GSM/LTE alarm - 4G Konfigurering via USB (Windows program) or SMS 2 x digital inputs med ”dry contact” eller “logic level” mode 2 x analog input fra 0 til 60VDC 2 x relæ output med NO/NC kontakter 1-Wire interface til 4 Teracom temperature og fugt følere Input fra enheder kan navgives med alarm-tekst mm. SMS alarm - op til 5 numre Email alarm - op til 5 e-mail modtagere, SMTP med TLS support 1 relæ kan aktiveres med opkald fra op til 100 telefonnumre Push mode – XML data sendes via HTTP Post til en remote server HTTP API kommandoer Firmware update "on air" Forsyningsspænding: 8 - 32VDC, 2Watt - tilkøb PSU Mål: 107 x 72 x 32 mm Vægt: 130g

Price 2,212.00 DKK

CO2, humidity, and temperature multi-sensor. MODBUS RTU RS485 Interface.

Product code: TSM400-4-CPTH

Multi sensor for CO2, Temperature and Humidity Interface: RS485 - MODBUS RTU LED indicator for status of communication Long-term stability based on digital signal processing Self-calibration on fresh air for CO2 measurements Changeable communication parameters Non-volatile memory for all settings Firmware update via the interface Size: 81 x 81 x 30 mm Weight: 66g Supply voltage: 4,5 - 26VDC / Max. 150mA

Price 2,046.00 DKK

Combined CO2 and barometric pressure sensor with a MODBUS RTU RS485 interface.

Product code: TSM400-4-CP

Multi sensor for CO2 and Barometric pressure Interface: RS485 - MODBUS RTU LED indicator for status of communication Long-term stability based on digital signal processing Self-calibration on fresh air for CO2 measurements Changeable communication parameters Non-volatile memory for all settings Firmware update via the interface Size: 81 x 81 x 30 mm Weight: 66g Supply voltage: 4,5 - 26VDC / Max. 150mA

Price 1,894.00 DKK

Temperature and humidity sensor with a MODBUS RTU RS485 interface.

Product code: TSM400-4-TH

Temperature and Humidity sensor RS485 MODBUS RTU Temperature: +/-0,4 °C (-10 to +60°C), max. +/-0,6°C Resolution: 0,1°C  Humidity: +/-3,0% RH (20 - 80% RH), max. +/-5% RH Resolution: 0,1% RH Supply voltage: 4,5 - 26VDC LED indicator for status of communication Long-term stability based on digital signal processing RS-485 interface (2-wire) carrying up to 32 nodes Changeable bitrate and other communication parameters Firmware update via the interface Size: 81 x 81 x 30 mm Weight: 66g

Price 975.00 DKK

Combined CO2 and barometric pressure sensor with a 1-wire interface for Teracom controllers

Product code: TSM400-1-CP

Multi sensor for CO2 and Barometric pressure Interface: 1-wire LED indicator for status of communication Long-term stability based on digital signal processing Self-calibration on fresh air for CO2 measurements Changeable communication parameters Non-volatile memory for all settings Firmware update via the interface Size: 81 x 81 x 30 mm Weight: 66g Supply voltage: 4,5 - 26VDC / Max. 150mA

Price 1,904.00 DKK

Join Our Newsletter

You may unsubscribe at any moment. For that purpose, please find our contact info in the legal notice.