Product title

Board til fjernkontrol og måling via Internet/LAN, 1 x DI, 1 x AI, 1 x Relæ, 1-Wire temperaturføler

Open board til smart temperatur- eller fugt måling and styring Password beskyttet Web baseret konfiguration og kontrol 1 x digital input med “dry contact” og “logic level” mode 1 x analog input fra 0 til 60VDC 1 relæ output med NO/NC kontakter 1-Wire input til 1 temperature eller fugtmåler SNMP v.1 support SNMP traps ved alarm E-mail udsendelse ved alarm SMTP med godkendelse (SSL/TLS er ikke supporteret) HTTP og XML API kommandoer Remote FTP firmware update.

Module for remote control and measurement via Internet / LAN, 2 x DI, 2 x AI, 2 x Relay output, 1-wire sensor input

Module with smart temperature and moisture measurement and control Password protected Web based configuration and control 1-Wire interface for 2 temperature sensors 2 x analog inputs from 0 to 60VDC - 10bit resolution, 100mV display 2 x digital inputs with "dry contact" and "logic level" mode 2 x relay output with NO / NC contacts E-mail broadcast by alarm SMTP with authentication (SSL / TLS is not supported) SNMP v.1 SNMP traps generated alarm for HTTP and XML API commands Remote firmware update.

Remote control and measurement module, IP watchdog for restart, 2 x DI, 2 x AI, 2 x relay output, 1-wire sensor input, 10-14VDC

Module with password protected Web based configuration and control 1-Wire interface for 2 sensors 2 x relay outputs with NO / NC contacts 2 x analog input with 0 to 60VDC 2x digital input with "dry contact" or "logic level" mode Stable IP watchdog monitoring - for restarting equipment SNMP v.1 support SNMP trap conditional messages VLAN and MAC address filtering Remote FTP firmware update. 12VDC - purchase PSU

Module for remote control via Internet / LAN, 2 x DI 2 x relay output pair with second module, 10 - 14VDC

Modul med password beskyttet Web baseret konfiguration 2 x digital inputs med “dry contact” og “logic level” mode 2 x relæ outputs med NO/NC kontakter Med Pair mellem 2 moduler over netværk med indgang til udgang Encrypted kommunikation Manuel eller DHCP netwærk konfiguration Enheds-ID filtrering Remote FTP firmware update. 12VDC

Module with digital I / O via Internet / LAN, 1 x DI, 8 x Relay outputs, 10 - 14VDC

Module with password protected Web based configuration and control 1 x digital input with "dry contact" or "logic level" mode 8 x relay outputs with NO / NC contacts SNMP v.1 support SNMP traps conditional alarm transmission E-mail broadcast on alarm SMTP with authentication (SSL / TLS is not supported) XML and HTTP API commands Remote firmware update Robust DIN- Rail / wall mounting. 12VDC

Ethernet-based output module with 2 x analog output, 4 x digital out with PWM, 2 x relay contact, MODBUS

Multi-Network Output Module with Galvanic I / O 10/100 Mbit Ethernet Connection Password Protected WEB Server 2 Analog Outputs with Voltage and Power Generator 0 - 20mA, 4 - 20mA, 0 - 24mA 0 - 5V or 0 - 10V voltage output 4 digital (open drain) outputs with ON / OFF or PWM 2 relays with COM, NO and NC contacts 4 scheduled actions, 1 time or weekly NTP, SNMP v2, SNMP trap for up to 5 recipients MODBUS TCP / IP HTTP upload with current status in XML or JSON remote server file HTTP API commands in server and client mode HTTP Post can be sent to 3 servers DIN rail / wall mounting Supply voltage: 10 - 32VDC / max 250mA

Remote monitor over Ethernet with 24 input ports. 4 Digital input, S0. 6 x analog input. RS485. Modbusrtu to Modbus TCP. SNMP

Multi input data logging for up to 70000 login 10/100 Mbit Ethernet Password protected, web-based configuration and control 4 digital inputs, compatible with S0 pulse interface 6 analog inputs with 0 / 10V and 0 / 20ma Modbus RTU interface for up to 24 sensors (registers) Up to 24 channels for monitoring Up to 24 Independent Alarms SNMP V.2 Support - SNMP Trap - Alarm Alerts HTTP and SNMP port change - HTTP API commands Periodic HTTP post of XML / JSON Status files for client server systems Modbus TCP / IP support Dynamic DNS with dynns, no- IP and DNS-O-MATIC Support NTP protocol support supply voltage: 10 to 32V DC

DIN bracket kit for Teracom units. 2 brackets in plastic + screws

DIN kit for Teracom devices 2 x Bracket + 4 screws

Data collector via Internet / LAN, 4 x Digital in, 4 x analog in, 4 x relay output, MODBUS, MQTT

Web based Data collector module with built-in WebServer Supports MQTT 3.1.1 protocol 4 x digital input Dry - external contact without voltage 4 x analogue inputs with 0 to 10VDC, 0-20mA 4 x powerful relay outputs with NO/NC contacts RS485 port MODBUS RTU up to 24 registers (sensors) Modbus TCP/IP support Data logger with memory for 70,000 logs SNMP v3 support with trap alarm 4 pcs. schemes for real-time control of relay Up to 24 independent alarms Secure email XML/JSON and HTTP API commands for client-server Dynamic DNS support for DynDNS, No-IP and DNS-O-Matic NTP time sync Supply voltage: 10 - 32VDC - purchase PSU Dimensions: 145 x 90 x 40 mm

Datalogger til digital og analog signaler via Internet/LAN, 2 x DI, 2 x analog, 2 x relæ udgang, 1-wire input, MODBUS

Stand-alone Datalogger via Ethernet Hukommelse for 70.000 målinger Password beskyttet Web baseret konfiguration og kontrol 2 x digital input “dry contact” 2 x analog inputs med 0 til 10VDC, 10-bit opløsning Multiplier og offset for analog input 2 x relæ med NO/NC kontakter 1-Wire interface til 8 følere SNMP v.2 support SNMP traps op til 5 alarm typer MODBUS TCP/IP support E-mail til 5 modtagere ved betinget alarm HTTP API kommandoer NTP og dynamic DNS support Remote firmware update. 10 - 32VDC - purchase PSU

Data collector via Internet / LAN, 4 x digital input, 4 x analog input, 4 x relay output, 1-wire for temp / moisture, Modbus

Web based data collector module with built-in Web server 4 x digital input dry - External contact without voltage 4 x analog inputs with 0 to 60vdc - 10mv resolution multiplier and offset for analog inputs and sensors 1-wire for a maximum of 8 sensors (16 parameters) 4 x Powerful relay outputs with No / NC Contacts Modbus TCP / IP Support SNMP V2 Support with Trap Alarm for 5 Recipients 4 PCS. Forms for real-time control of relay Specific logical functions for relays Secured email XML / JSON and HTTP API commands for Client server Dynamic DNS support for Dyndns, No-IP and DNS- O-Matic NTP TimeSync Supply voltage: 10 - 32VDC - Buy PSU Dim: 145 x 90 x 40 mm