AC / DC voltage meter 0-264VAC, 0-370VDC with MODBUS RTU (RS485), +/-0.5%, 24 bit, DIN

AC and DC voltage meter with true RMS Resolution: 24 bits 0-264VAC 0-60Hz (3 phases) L1, L2, L3, N 0-+/-370VDC Input impedance greater than 2.4Mohm Modbus RTU (2-wire RS485) Built-in RS485 termination (120 ohms) Up to 63 units per RS485 Bus LED for communication status Response time: less than 50mS Temperature: -20 - +60°C Supply voltage: 5 - 28VDC Dimensions: 86 x 59 x 35 mm

Product title

Board til fjernkontrol og måling via Internet/LAN, 1 x DI, 1 x AI, 1 x Relæ, 1-Wire temperaturføler

Open board til smart temperatur- eller fugt måling and styring Password beskyttet Web baseret konfiguration og kontrol 1 x digital input med “dry contact” og “logic level” mode 1 x analog input fra 0 til 60VDC 1 relæ output med NO/NC kontakter 1-Wire input til 1 temperature eller fugtmåler SNMP v.1 support SNMP traps ved alarm E-mail udsendelse ved alarm SMTP med godkendelse (SSL/TLS er ikke supporteret) HTTP og XML API kommandoer Remote FTP firmware update.

Module for remote control and measurement via Internet / LAN, 2 x DI, 2 x AI, 2 x Relay output, 1-wire sensor input

Module with smart temperature and moisture measurement and control Password protected Web based configuration and control 1-Wire interface for 2 temperature sensors 2 x analog inputs from 0 to 60VDC - 10bit resolution, 100mV display 2 x digital inputs with "dry contact" and "logic level" mode 2 x relay output with NO / NC contacts E-mail broadcast by alarm SMTP with authentication (SSL / TLS is not supported) SNMP v.1 SNMP traps generated alarm for HTTP and XML API commands Remote firmware update.

Remote control and measurement module, IP watchdog for restart, 2 x DI, 2 x AI, 2 x relay output, 1-wire sensor input, 10-14VDC

Module with password protected Web based configuration and control 1-Wire interface for 2 sensors 2 x relay outputs with NO / NC contacts 2 x analog input with 0 to 60VDC 2x digital input with "dry contact" or "logic level" mode Stable IP watchdog monitoring - for restarting equipment SNMP v.1 support SNMP trap conditional messages VLAN and MAC address filtering Remote FTP firmware update. 12VDC - purchase PSU

Module for remote control via Internet / LAN, 2 x DI 2 x relay output pair with second module, 10 - 14VDC

Modul med password beskyttet Web baseret konfiguration 2 x digital inputs med “dry contact” og “logic level” mode 2 x relæ outputs med NO/NC kontakter Med Pair mellem 2 moduler over netværk med indgang til udgang Encrypted kommunikation Manuel eller DHCP netwærk konfiguration Enheds-ID filtrering Remote FTP firmware update. 12VDC

Module with digital I / O via Internet / LAN, 1 x DI, 8 x Relay outputs, 10 - 14VDC

Module with password protected Web based configuration and control 1 x digital input with "dry contact" or "logic level" mode 8 x relay outputs with NO / NC contacts SNMP v.1 support SNMP traps conditional alarm transmission E-mail broadcast on alarm SMTP with authentication (SSL / TLS is not supported) XML and HTTP API commands Remote firmware update Robust DIN- Rail / wall mounting. 12VDC

Datalogger til digital og analog signaler via Internet/LAN, 2 x DI, 2 x analog, 2 x relæ udgang, 1-wire input, MODBUS

Stand-alone Datalogger via Ethernet Hukommelse for 70.000 målinger Password beskyttet Web baseret konfiguration og kontrol 2 x digital input “dry contact” 2 x analog inputs med 0 til 10VDC, 10-bit opløsning Multiplier og offset for analog input 2 x relæ med NO/NC kontakter 1-Wire interface til 8 følere SNMP v.2 support SNMP traps op til 5 alarm typer MODBUS TCP/IP support E-mail til 5 modtagere ved betinget alarm HTTP API kommandoer NTP og dynamic DNS support Remote firmware update. 10 - 32VDC - purchase PSU

Data collector via Internet / LAN, 4 x digital input, 4 x analog input, 4 x relay output, 1-wire for temp / moisture, Modbus

Web based data collector module with built-in Web server 4 x digital input dry - External contact without voltage 4 x analog inputs with 0 to 60vdc - 10mv resolution multiplier and offset for analog inputs and sensors 1-wire for a maximum of 8 sensors (16 parameters) 4 x Powerful relay outputs with No / NC Contacts Modbus TCP / IP Support SNMP V2 Support with Trap Alarm for 5 Recipients 4 PCS. Forms for real-time control of relay Specific logical functions for relays Secured email XML / JSON and HTTP API commands for Client server Dynamic DNS support for Dyndns, No-IP and DNS- O-Matic NTP TimeSync Supply voltage: 10 - 32VDC - Buy PSU Dim: 145 x 90 x 40 mm

Data logger for temperature and moisture via Internet / LAN, sensor interface RS485 or 1-wire, sensor acquisition

Datalogger til eksterne temperatur- og fugtsensorer Hukommelse til 70.000 målinger Temperatur, fugt og dew point kan vises grafisk 1-Wire og RS485 sensor-interface Op til 8 Teracom sensorer MODBUS TCP/IP support SNMP v2 med trap alarm til 5 modtagere Secured email XML/JSON og HTTP API kommandoer til client-server Dynamic DNS, DynDNS, No-IP og DNS-O-Matic NTP support for tidssynch Remote firmware update 10 - 32VDC - purchase PSU

1-wire temperature sensor, -40 - + 85 ° C, Dallas chip, IP65, 1 meter cable

Temperature sensor with Dallas chip - up to 8 pieces on the same bus 1-wire communication to the measuring electronics ± 0.5 ° C accuracy from -10 ° C to + 85 ° C 12 bit resolution Aluminum head provides low thermal resistance IP65 close Very low power consumption Each unit has a unique 64 bit serial number

1-wire temperature sensor, -40 - + 85 ° C, box with 2 x RJ11. Cascading. Dallas chip, wall mount

Temperature sensor with Dallas chip - up to 8 pieces on the same bus for 1-wire communication for measuring electronics With plug for cascade coupling for next sensor ± 0.5 ° C accuracy from -10 ° C to +85 ° C 12 bit resolution Temperature sensor in box Very low power consumption Each device has a unique 64 bit serial number