Remote monitor over Ethernet with 24 input ports. 4 Digital input, S0. 6 x analog input. RS485. Modbusrtu to Modbus TCP. SNMP

Product code: TCW260

Multi input data logging for up to 70000 login
10/100 Mbit Ethernet
Password protected, web-based configuration and control
4 digital inputs, compatible with S0 pulse interface
6 analog inputs with 0 / 10V and 0 / 20ma
Modbus RTU interface for up to 24 sensors (registers)
Up to 24 channels for monitoring
Up to 24 Independent Alarms
SNMP V.2 Support - SNMP Trap - Alarm Alerts
HTTP and SNMP port change - HTTP API commands
Periodic HTTP post of XML / JSON Status files for client server systems
Modbus TCP / IP support
Dynamic DNS with dynns, no- IP and DNS-O-MATIC Support
NTP protocol support
supply voltage: 10 to 32V DC

  • Add to Comparison Remove from Comparison
    • 3,204.00 DKK
    Tax excluded
    Last items in stock
    Quantity

    TcW260 is an energy monitoring module with an Ethernet interface and data logger functionality. All its inputs are galvanically isolated from the power supply.
    The module has 4 digital inputs, S0 compatible.
    The digital inputs can work in ON / OFF or counter mode. There are also 6 analog inputs. Each analog input can work either in voltage (0 - 10V) or power loop (0 - 20mA). TCW260 supports Modbus RTU interface for teracom and third-party sensors. RS-485 interface is fully insulated from the power supply.

    Technical data:
    Up to 24 channels for voltage (Volt) / Power (MA) or Energy Monitoring
    Up to 24 Categorized Alarms with Flexible Setup parameters

    4 Isolated digital inputs with S0 interface (EN62053-31)
    On / Off and Counter (Counter) Digital Inputs
    6 Isolated Analog Inputs with 0 - 20ma or 0 -10V. Br> RS-485 isolated interface with up to 24 Modbus RTU registers (sensors)
    Password Protected Web based configuration and control

    TCW260
    1 Item

    Data sheet

    Weight
    200g
    Driftstemperatur
    -20° - +55°C
    Strømforbrug
    220 mA @ 12 VDC (without RS-485 powering)
    Hukommelse
    Internal FLASH memory Settings segment endurance: 100 000 cycles (Every setting change is a memory cycle). Data logger segment endurance: 100 000 cycles of 70000 records. Update segment endurance: 100 000 cycles (updates).
    Luftfugtighed
    10 to 80% (non-condensing)
    Strømforsyning
    10 til 32V DC
    Dimensioner
    145 x 90 x 40
    Indgang
    Isolation: Isolated (1000VDC) Mode: OPEN/CLOSED (“Dry contact”) or COUNTER (S0-pulse interface outputs) Maximum input voltage: +5.5VDC Sampling rate: 1mS Digital filtering time interval: 5 to 60000mS