RFID MiFare 13.56MHz - Huge selection

Mifare RFID 13,56MHz

Mifare 13.56 MHz RFID technology and main variants

The Mifare standard for RFID was originally defined by Philips in 1994 for use in non-contact electronic ticketing and was later described in the ISO / IEC 14443A standard for 13 , 56 MHz non-contact smart cards. Therefore, there is no emphasis on large reading distance, which is typically up to 8 cm using common tags and readers. Mifare is used eg. in the travel card in Denmark....

Mifare 13.56 MHz RFID technology and main variants

The Mifare standard for RFID was originally defined by Philips in 1994 for use in non-contact electronic ticketing and was later described in the ISO / IEC 14443A standard for 13 , 56 MHz non-contact smart cards. Therefore, there is no emphasis on large reading distance, which is typically up to 8 cm using common tags and readers. Mifare is used eg. in the travel card in Denmark. Mifare tags, like tags for the EM standard for 125 KHz, have a unique ID (UID) - but also have built-in memory that is stored in "sectors" in the tag.

Mifare technology available in several variants. Mifare Classic is provided with 1k or 4k memory organized in sectors. Mifare UltraLight has 512 bytes of memory in sectors - but otherwise works as Mifare Classic. MIfare PRO Works as a "smart card" with CPU and the ability to insert an operating system into the tag, so it's probably the most flexible of the Mifare technologies. In addition, there is a dedicated processor built-in for DES encryption to allow data to be secured against unwanted access.

Mifare DESFire supports AES encryption as well as DES and 3DES encryption when accessing sector data in the tag. Therefore, data with very high security can be protected against unwanted reading and copying. Works as a "smart card" with cpu and operating system built into a PROM area in the tag optimized for fast reading of data. Can use UID of up to 64 bits.

More Less

Mifare RFID 13,56MHz

Subcategories

  • Holder
  • MIFARE skriver
  • MIFARE tags
  • MIFARE læser
    <p>See our wide selection of mifare readers in different interfaces. In this category you will find mifare readers for USB, RS232, RS485, Wigand or network. Mifare can be used as access control or registration with contactless card or proxy card. Mifare uses ISO / IEC 14443 Type A 13.56 MHz as standard.</p>

There are 29 products.

Showing 25-29 of 29 item(s)

RFID Reader Mifare, Ultralite, Desfire 13.56MHz, 40bit HEX. USB HID keyboard emulation. Good for TAG/Card for user setup

Product code: RFID-M-USB

RFID 13.56MHz Mifare læser som USB stick ISO14443A standard 5VDC/100mA fra USB-port USB 1.1 UID kode som 40 bit HEX. HID til USB port 40 bit UID Læser samme kode en gang ved præsentation Læseafstand op til 2 cm LED tre-farvet Mål: 70 mm x 20 mm x 9,8 mm Vægt: 18g Læsehastighed: mindre end 100ms

Price 1,413.00 DKK

Join Our Newsletter

You may unsubscribe at any moment. For that purpose, please find our contact info in the legal notice.