RFID MiFare 13.56MHz - Huge selection

Mifare RFID 13,56MHz

Mifare 13.56 MHz RFID technology and main variants

The Mifare standard for RFID was originally defined by Philips in 1994 for use in non-contact electronic ticketing and was later described in the ISO / IEC 14443A standard for 13 , 56 MHz non-contact smart cards. Therefore, there is no emphasis on large reading distance, which is typically up to 8 cm using common tags and readers. Mifare is used eg. in the travel card in Denmark....

Mifare 13.56 MHz RFID technology and main variants

The Mifare standard for RFID was originally defined by Philips in 1994 for use in non-contact electronic ticketing and was later described in the ISO / IEC 14443A standard for 13 , 56 MHz non-contact smart cards. Therefore, there is no emphasis on large reading distance, which is typically up to 8 cm using common tags and readers. Mifare is used eg. in the travel card in Denmark. Mifare tags, like tags for the EM standard for 125 KHz, have a unique ID (UID) - but also have built-in memory that is stored in "sectors" in the tag.

Mifare technology available in several variants. Mifare Classic is provided with 1k or 4k memory organized in sectors. Mifare UltraLight has 512 bytes of memory in sectors - but otherwise works as Mifare Classic. MIfare PRO Works as a "smart card" with CPU and the ability to insert an operating system into the tag, so it's probably the most flexible of the Mifare technologies. In addition, there is a dedicated processor built-in for DES encryption to allow data to be secured against unwanted access.

Mifare DESFire supports AES encryption as well as DES and 3DES encryption when accessing sector data in the tag. Therefore, data with very high security can be protected against unwanted reading and copying. Works as a "smart card" with cpu and operating system built into a PROM area in the tag optimized for fast reading of data. Can use UID of up to 64 bits.

More Less

Mifare RFID 13,56MHz

Subcategories

  • Holder
  • MIFARE skriver
  • MIFARE tags
  • MIFARE læser
    <p>See our wide selection of mifare readers in different interfaces. In this category you will find mifare readers for USB, RS232, RS485, Wigand or network. Mifare can be used as access control or registration with contactless card or proxy card. Mifare uses ISO / IEC 14443 Type A 13.56 MHz as standard.</p>

There are 29 products.

Showing 1-12 of 29 item(s)

RFID Reader for Mifare Ultralight and Mifare1 Standard Card, Wiegand, MSR ABA TK2 and RS232 Interface, 5 - 18VDC

Product code: RFID-MR

Reading distance: Up to 5 cm Frequency: 13.56 MHz Read Mifare Ultralight and Mifare F1 Standard Tag Mifare 1024/4096 byte, Ultralight 512bit, ISO 14443A 3 in 1 interface : Wiegand, MSR ABA TK2 and RS232 LED and Buzzer Quick Data Transfer Weatherproof, ABS Cable Length: 90 cm Cable is not terminated with DB9 Easy to install Supply: 5 - 18VDC (Liniary PSU) Dim: 83 x 47 x 16 mm

Price 957.00 DKK

RFID TAG Mifare and Mifare Classic ISO14443A, 1 KB 16 Sectors Memory. 13.56MHz, Unique UID, Number printet

Product code: RFID-MTAG-KORT-N

Mifare Classic 1K RFID Tag Reading distance: 0 - 10 cm ISO14443A 1 Kilobyte Memory 768 byte Free in 16 sectors / 4 blocks / 16 bytes UID code is factory programmed - Can't change Frequency: 13.56MHz Material: ABS, IP68 credit card format Numbered - printet on the card target: 85.7 x 54 x 0.8 mm

Price 46.00 DKK

RFID TAG Mifare and Mifare Classic ISO14443A, 1 KB 16 Sectors Memory. 13.56MHz, Unique UID, Keychain

Product code: RFID-MTAG-WD1K

Mifare Classic1K TAG designed as key ring Bag with 20 pieces. reading distance: 0 - 5 cm ISO14443A 1 kilobyte Memory 768 byte free in 16 sectors / 4 Blocks / 16 byte UID code is factory programmed - cannot be changed Frequency: 13.56MHz Material: ABS, IP68 Dim: 40 x 32 x 4 mm

Price 477.00 DKK

RFID TAG Mifare and Mifare Classic ISO14443A, 1 KB 16 Sectors Memory. 13.56MHz, unique UID, credit card

Product code: RFID-MTAG-KORT1K

Mifare Classic 1K RFID Tag Reading distance: 0 - 10 cm ISO14443A 1 Kilobyte Memory 768 byte free in 16 sectors / 4 blocks / 16 bytes UID code is factory programmed - Cannot be changed Frequency: 13.56MHz Material: ABS, IP68 credit card format Dim: 85.7 x 54 x 0.8 mm

Price 58.00 DKK

RFID Reader Mifare 13.56MHz Indoor, Hex 8 digits, HID - Keyboard Emulation, USB With Removable USB Cable

Product code: RFID-M5USB-I

Keyboard Emulation: 8 digits, 32bit HEX Frequency: 13,56MHz Mifare Ultra Light versions: Mifare S50, S70, ISO15693, ISO14443A / B UID in positive Normal sequence Power supply: 5VDC from USB port Operating temperature: -10 - + 75 ° C Reading distance: 5 ~ 15 cm Cable length: Solved USB cable Dimension: 118 (L) x 75 (W) x 17 ( H) mm Weight: 250g ± 10% desktop - table model

Price 917.00 DKK

Join Our Newsletter

You may unsubscribe at any moment. For that purpose, please find our contact info in the legal notice.