RFID MiFare 13.56MHz - Huge selection

Mifare RFID 13,56MHz

Mifare 13.56 MHz RFID technology and main variants

The Mifare standard for RFID was originally defined by Philips in 1994 for use in non-contact electronic ticketing and was later described in the ISO / IEC 14443A standard for 13 , 56 MHz non-contact smart cards. Therefore, there is no emphasis on large reading distance, which is typically up to 8 cm using common tags and readers. Mifare is used eg. in the travel card in Denmark....

Mifare 13.56 MHz RFID technology and main variants

The Mifare standard for RFID was originally defined by Philips in 1994 for use in non-contact electronic ticketing and was later described in the ISO / IEC 14443A standard for 13 , 56 MHz non-contact smart cards. Therefore, there is no emphasis on large reading distance, which is typically up to 8 cm using common tags and readers. Mifare is used eg. in the travel card in Denmark. Mifare tags, like tags for the EM standard for 125 KHz, have a unique ID (UID) - but also have built-in memory that is stored in "sectors" in the tag.

Mifare technology available in several variants. Mifare Classic is provided with 1k or 4k memory organized in sectors. Mifare UltraLight has 512 bytes of memory in sectors - but otherwise works as Mifare Classic. MIfare PRO Works as a "smart card" with CPU and the ability to insert an operating system into the tag, so it's probably the most flexible of the Mifare technologies. In addition, there is a dedicated processor built-in for DES encryption to allow data to be secured against unwanted access.

Mifare DESFire supports AES encryption as well as DES and 3DES encryption when accessing sector data in the tag. Therefore, data with very high security can be protected against unwanted reading and copying. Works as a "smart card" with cpu and operating system built into a PROM area in the tag optimized for fast reading of data. Can use UID of up to 64 bits.

More Less

Mifare RFID 13,56MHz

Subcategories

  • Holder
  • MIFARE skriver
  • MIFARE tags
  • MIFARE læser
    <p>See our wide selection of mifare readers in different interfaces. In this category you will find mifare readers for USB, RS232, RS485, Wigand or network. Mifare can be used as access control or registration with contactless card or proxy card. Mifare uses ISO / IEC 14443 Type A 13.56 MHz as standard.</p>

There are 29 products.

Showing 13-24 of 29 item(s)

RFID Duplicator, 125kHz / Mifare/NFC reads / writes with USB interface. Can clone UID to t5577 RW RFID TAG

Product code: RFID-KOPI-USB

RFID Copy Reader / Writes to T5577 RW Tag interface: USB Work voltage: 5 VDC Work current: 200mA Standby Stream: 50mA Normal current: 100mA 125kHz, 13,56MHz Mifare / NFC Compatible with CCID and PC / SC IC / ID Dual Frequency Replication Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card Support UID, Fuid, Cuid, UFUID IC Semi-Encrypted Card, IC Full Encryption Card Dim: 108 (L) x 68 (W) x 12 mm (H)

Price 786.00 DKK

IP68 RFID reader, 125kHz / 13.56MHz, Wiegand 26/34, only for Access Controls with Wiegand interface. 12VDC

Product code: RFID-MR-IP68

Waterproof RFID reader only with Wiegand Interface Connect to access controls with Wiegand TAG Type: EM / Mifare Reading distance: 5.8 cm IP68 Frequency: 125kHz / 13,56MHz LED and Buzzer Cable out from the back Detachable Backpiece Supply Voltage: 12VDC Dimensions: 86 x 86 x 22mm

Price 1,776.00 DKK

UHF RFID, NFC, Mifare, 1D/2D/QR Barcode reader. Wifi, Bluetooth, 4G LTE, GPS. 2Watt UHF power. 13MP camera. Pistol Grip

Product code: BARHAND-UNI-RFID

Top-class scanner for access and product registration Professional Multi Reader and Writer for RFID and Barcode 1D/2D/QR  Powerful Circular polarized antenna UHF RFID read and write up to 25meter, depending on TAG UHF tAGs are passive - without battery Reader NFC and Mifare tAGs Reader up to 900 TAGs per second Barcode reader CCD: 1D, 2D, QR codes Access to APP Center with programs and tools 13MP camera with flash 5.2 "Display - 1920 x 1080p with touch Communications: dual band WiFi, Bluetooth, 4G LTE Dual SIM or Single SIM and Micro CD GPS/AGPS/GLONASS Battery: 8000mAh Li-ion (apx. 12 hours W T) IP65 close. 1.5meter drop tested Operating temperature -20 - +50°C

Call For Price

Price 0.00 DKK

RFID reader 13,56MHz Mifare, indoor - DECIMAL 10 digits, HID - keybord emulation. Powered by the USB. Desktop

Product code: RFID-M5USB-D10

Keyboard emulation: 10 digits, 40bit ASCII, Decimal Frequency: 13,56MHz Mifare Ultralight Versions: Mifare S50, S70, ISO15693, ISO14443A / B Power supply: 5VDC from USB port Operating Temperature: -10 - + 75 ° C reading range: 5 ~ 15 cm cable length: solved USB cable Dimension: 118 (L) × 75 (W) x 17 (H) mm Weight: 250g ± 10% Desktop - desktop model

Price 916.00 DKK

RFID MIFARE Reader 13.56MHz, Indoor - Decimal 8 digits, 32bit, HID - Keybord Emulation. Powered from USB. Desktop.

Product code: -RFID-M5USB-D8

Keyboard emulation: 8 digits, 32-bit ASCII, Decimal Frequency: 13,56MHz Mifare Ultralight Versions: Mifare S50, S70, ISO15693, ISO14443A / B Power supply: 5VDC from USB port Operating Temperature: -10 - + 75 ° C reading range: 5 ~ 15 cm cable length: solved USB cable Dimension: 118 (L) × 75 (W) x 17 (H) mm Weight: 250g ± 10% Desktop - desktop model

Price 916.00 DKK

RFID reader 13,56MHz Mifare, Waterproof - DECIMAL 8 digits, 32bit, HID - keybord emulation. Powered by the USB.

Product code: RFID-M51USB-D8

Keyboard emulation: 8 digits, 32-bit ASCII, Decimal Frequency: 13,56MHz Mifare Ultralight Versions: Mifare S50, S70, ISO15693, ISO14443A / B Power supply: 5VDC from USB port Operating Temperature: -10 - + 75 ° C reading range: 5 ~ 15 cm cable: Fixed USB cable from the rear of Dimension: 118 (L) × 75 (W) x 17 (H) mm Weight: 250g ± 10% Waterproof IP67, wall mounting

Price 962.00 DKK

RFID reader 13,56MHz Mifare, Waterproof - HEX 10 digits, 40bit, HID - keybord emulation. Powered by the USB. outdoor model

Product code: -RFID-M51USB-H10

Keyboard emulation: 10 digits, 40bit Hexadecimal Frequency: 13,56MHz Mifare Ultralight Versions: Mifare S50, S70, ISO15693, ISO14443A / B Power supply: 5VDC from USB port Operating temperature : -10 - + 75 ° C reading range: 5 ~ 15 cm cable: Fixed USB cable on the far side Dimension: 118 (L) × 75 (W) x 17 (H) mm Weight: 250g ± 10% Waterproof - IP67

Price 916.00 DKK

Dual Band RFID reader 125kHz, 13,56MHz, NFC, EM400x, Mifare, 10 Decimal ASCII. HID - keyboard emulation. USB. Waterproof

Product code: RFID-D51USB-D10

Dual band RFID card reader for USB - Decimal 10 characters decimal (ASCII) - 40bit 125 kHz, 13.56 MHz, NFC 125khz: EM4001, EM4002, EM4200 Mifare: ISO 1443A/B/15693 HID - Keyboard Emulation Reading distance: Up to 10 cm Align via USB USB interface Dip-SW to ID format setting - see Table  Environment: IP67 Waterproof, outdoor mounting operating temp. -25 ° to + 70 ° C target: 88 x 56 x 18 mm

Call For Price

Price 0.00 DKK

Dual Band RFID reader 125kHz, 13,56MHz, NFC, EM400x, Mifare. 10 characters Decimal ASCII. HID - keyboard emulation. USB. Desktop

Product code: RFID-D5USB-D10

Dual band RFID card reader for USB - Decimal 10 characters decimal (ASCII) - 40bit 125 kHz, 13.56 MHz, NFC 125khz: EM4001, EM4002, EM4200 Mifare: ISO 1443a / B / 15693 HID - Keyboard Emulation Reading distance: Up to 10 cm Align via USB USB interface ID Format setting with DIP switches - see Table Operating Temp. -25 ° to + 70 ° C target: 88 x 56 x 18 mm

Price 1,040.00 DKK

Dual band RFID reads 125kHz EM, 13.56MHz Mifare, 10 Decimal. HID - Keyboard Emulation. USB. Desktop.

Product code: RFID-D5USB-D10A

Dual band RFID card reader for USB - 10 Decimal 125 kHz: EM-Marin EM41xx, EM4200 13,56MHz: Mifare - ISO14443A HID - Keyboard Emulation Reading distance: 5 to 8cm Powered by USB USB interface operating temp. -10 ° to + 70 ° C dimensions: 98 x 63 x 10mm (L x B x H)

Price 1,021.00 DKK

Join Our Newsletter

You may unsubscribe at any moment. For that purpose, please find our contact info in the legal notice.