Barcode Scanner - Magnetic card reader - RFID and POS

RFID / Barcode / Magnet stribe / TAGs / POS

In this overall category you will find a wealth of products and subcategories. Danbit offers for everything from RFID readers Card readers. We stand ready to help you with choices and possible. setup. Looking for something specific, which may be tailored to your job, contact Danbit tel. 56 66 20 20.

In our knowledgebase, you can read more about blah. barcode formats.

RFID / Barcode / Magnet stribe / TAGs / POS

Subcategories

  • Barcode Readers
    <p>See the wide range of barcode readers and accessories. <!-- P--></p> <p>At Danbit we have a large variety of barcode scanners. We have the old 1D scanners, but we also have the newest, blah. our hand scanner to the finger. <!-- p--></p> <p> </p> <p><strong>Handheld <!-- strong--> </strong>is available as a wireless or wired PC or other equipment. Wireless can be RF - own radio frequency, Bluetooth, Zigbee, etc. The wireless usually have a base unit (cradle) connected to the PC or other device and is also charging unit to the handheld scanner. Some scanners have built-in memory for many measurements and can therefore be used outside the radio coverage of the base. When the scanner is placed in the base unit or is within the radio coverage, the scanned data is transferred to the PC. Some scanners can be used only if the one in radio coverage of the base. <!-- P--></p> <p><!-- p--></p> <p> </p> <p><strong>Laser / LED barcode scanner:</strong> <!-- strong--> There are two basic versions. One is with a laser beam (or LED) having a certain frequency, sent from the laser toward the bar code. By means of mirrors, the reflected laser light is sent to a photodiode in læserer. The barcode is read converted and sent to the PC. Scanner with laser light is 1D (barcode) and can often be used where there is a lot of ambient light. <!-- P--></p> <p><!-- p--></p> <p> </p> <p><strong>CCD scanner</strong>: <!-- strong--> Is fitted with a small camera as a reader. It can read 2D and 1D images (QR codes, etc.).<br /> There are pros and cons of scanners with CCD. One advantage is that it can be read 1D, 2D codes, regardless of how the scanner is rotated. It can also read bar codes that are slightly curled. The downside is that CCD scanner may have difficulty reading glossy and highly light-reflective barcodes. CCD scanner is more robust. The slightly more expensive CCD scanners have a faster processor and better detekteringssoftware.<br /> We can help with advice and guidance.<strong><strong><strong> <!-- P--> </strong></strong></strong></p> <p><strong><strong><strong><!-- p--></strong></strong></strong></p>
  • Hand terminal Barcode / RFID
    <p>Advanced Hand Terminal Scanner with many features and applications. Ideal for package delivery where navigation and positioning are informed by scanning the package. GSM function may be used. Used to send text messages to the driver about route changes, or direct conversation between the driver and the control panel. Bluetooth / WLAN is used in output data in the handheld scanner on departure / arrival from / to the center.</p> <p>DANBIT supplies hand terminals across industries. We offer different hand terminals for different industries such as the post office or health care. With a handheld terminal scanner, you have both scanner and computer at your fingertips. Have a question for one of our scanners or didn't find the one you were looking for? So contact us today and we will find the right one for you.</p> <p><!-- P--></p>
  • RFID 125kHz EM standard
  • Mifare RFID 13,56MHz
    <p>Mifare 13.56 MHz RFID technology and main variants</p> <p>The Mifare standard for RFID was originally defined by Philips in 1994 for use in non-contact electronic ticketing and was later described in the ISO / IEC 14443A standard for 13 , 56 MHz non-contact smart cards. Therefore, there is no emphasis on large reading distance, which is typically up to 8 cm using common tags and readers. Mifare is used eg. in the travel card in Denmark. Mifare tags, like tags for the EM standard for 125 KHz, have a unique ID (UID) - but also have built-in memory that is stored in "sectors" in the tag.</p> <p></p> <p>Mifare technology available in several variants. Mifare Classic is provided with 1k or 4k memory organized in sectors. Mifare UltraLight has 512 bytes of memory in sectors - but otherwise works as Mifare Classic. MIfare PRO Works as a "smart card" with CPU and the ability to insert an operating system into the tag, so it's probably the most flexible of the Mifare technologies. In addition, there is a dedicated processor built-in for DES encryption to allow data to be secured against unwanted access.</p> <p></p> <p>Mifare DESFire supports AES encryption as well as DES and 3DES encryption when accessing sector data in the tag. Therefore, data with very high security can be protected against unwanted reading and copying. Works as a "smart card" with cpu and operating system built into a PROM area in the tag optimized for fast reading of data. Can use UID of up to 64 bits.</p>
  • Desfire RFID 13,56MHz
  • UHF Reader / long distance
  • Magnetic stripe Read / Write / Card
  • POS - Point of Sales
  • Dallas iBotton
  • Adapter and Converter

There are 59 products.

Showing 37-48 of 59 item(s)

RFID reader 13,56MHz Mifare, Waterproof - HEX 10 digits, 40bit, HID - keybord emulation. Powered by the USB. outdoor model

Product code: -RFID-M51USB-H10

Keyboard emulation: 10 digits, 40bit Hexadecimal Frequency: 13,56MHz Mifare Ultralight Versions: Mifare S50, S70, ISO15693, ISO14443A / B Power supply: 5VDC from USB port Operating temperature : -10 - + 75 ° C reading range: 5 ~ 15 cm cable: Fixed USB cable on the far side Dimension: 118 (L) × 75 (W) x 17 (H) mm Weight: 250g ± 10% Waterproof - IP67

Price 916.00 DKK

RFID reader 13,56MHz Mifare, Waterproof - HEX 8 digits, 32bit, HID - keybord emulation. Powered by the USB. outdoor model

Product code: RFID-R51EUSB-D8

Keyboard emulation: 8 digits, 32bit Hexadecimal Frequency: 13,56MHz Mifare Ultralight Versions: Mifare S50, S70, ISO15693, ISO14443A / B Power supply: 5VDC from USB port Operating temperature : -10 - + 75 ° C reading range: 5 ~ 15 cm cable: Fixed USB cable on the far side Dimension: 118 (L) × 75 (W) x 17 (H) mm Weight: 250g ± 10% Waterproof - IP67

Price 962.00 DKK

Dual Band RFID reader 125kHz, 13,56MHz, NFC, EM400x, Mifare, 10 Decimal ASCII. HID - keyboard emulation. USB. Waterproof

Product code: RFID-D51USB-D10

Dual band RFID card reader for USB - Decimal 10 characters decimal (ASCII) - 40bit 125 kHz, 13.56 MHz, NFC 125khz: EM4001, EM4002, EM4200 Mifare: ISO 1443A/B/15693 HID - Keyboard Emulation Reading distance: Up to 10 cm Align via USB USB interface Dip-SW to ID format setting - see Table  Environment: IP67 Waterproof, outdoor mounting operating temp. -25 ° to + 70 ° C target: 88 x 56 x 18 mm

Call For Price

Price 0.00 DKK

Dual Band RFID reader 125kHz, 13,56MHz, NFC, EM400x, Mifare. 10 characters Decimal ASCII. HID - keyboard emulation. USB. Desktop

Product code: RFID-D5USB-D10

Dual band RFID card reader for USB - Decimal 10 characters decimal (ASCII) - 40bit 125 kHz, 13.56 MHz, NFC 125khz: EM4001, EM4002, EM4200 Mifare: ISO 1443a / B / 15693 HID - Keyboard Emulation Reading distance: Up to 10 cm Align via USB USB interface ID Format setting with DIP switches - see Table Operating Temp. -25 ° to + 70 ° C target: 88 x 56 x 18 mm

Price 1,040.00 DKK

RFID Handheld RFID reader 125kHz. For rounding guards. Memory for 14,000 readings with date and time. Incl. Guard software.

Product code: RFID-PATROL-U

Personell who shall document the route with the date and time RFID TAGs placed at check-points and has unique ID RFID TAG is 125kHz EM400X guard pointing toward Days and press the scan button Each TAG reading acknowledged with short vibration Operation with a pressure Journal memory: approximately 14,000 items battery - easy to replace up to 55,000 scans at full battery interface is USB Operating temperature: -10 to + 55 ° C Patrol Tour Manager software included

Price 5,594.00 DKK

Dual band RFID reads 125kHz EM, 13.56MHz Mifare, 10 Decimal. HID - Keyboard Emulation. USB. Desktop.

Product code: RFID-D5USB-D10A

Dual band RFID card reader for USB - 10 Decimal 125 kHz: EM-Marin EM41xx, EM4200 13,56MHz: Mifare - ISO14443A HID - Keyboard Emulation Reading distance: 5 to 8cm Powered by USB USB interface operating temp. -10 ° to + 70 ° C dimensions: 98 x 63 x 10mm (L x B x H)

Price 1,021.00 DKK

Micro UHF RFID 865MHz Ceramic TAG against Metal, ISO18000-6C, EPC Gene 2, EPC 96bit TID 512bit, IP68

Product code: RFID868TAG10-512

Ceramic UHF Take against metal survive Temp: -40 - + 250 ° C Short-lived can autoclaved several times operating temp: -40 - + 85 ° C Alien Higgs-3 chip < Br> Objective: 10 x 5 x 3 mm Weight: 0.8g reading distance: Up to 3 meters (1 watt reader) suitable for location against metal - can give better reading distance read / write : 100,000 times Data Storage: Over 10 years IP68 

Price 39.00 DKK

RFID Reader Mifare, Ultralite, Desfire 13.56MHz, 40bit HEX. USB HID keyboard emulation. Good for TAG/Card for user setup

Product code: RFID-M-USB

RFID 13.56MHz Mifare læser som USB stick ISO14443A standard 5VDC/100mA fra USB-port USB 1.1 UID kode som 40 bit HEX. HID til USB port 40 bit UID Læser samme kode en gang ved præsentation Læseafstand op til 2 cm LED tre-farvet Mål: 70 mm x 20 mm x 9,8 mm Vægt: 18g Læsehastighed: mindre end 100ms

Price 1,413.00 DKK

125khz EM RFID reads with USB HID. Desktop with a card holder. Can be programmed with Pre and Post characters.

Product code: RFID-RM-G

125kHz EM 4xxx reading with USB USB HID (Plug and Play) Power supplied from USB Decimal or Hex - Can be programmed Download software for programming - easy to use Can USB HID or USB Virtual COM - must be ordered by order release Dim: 100 x 65 x 23 mm Material: ABS

Price 1,053.00 DKK

Join Our Newsletter

You may unsubscribe at any moment. For that purpose, please find our contact info in the legal notice.