Barcode Scanner - Magnetic card reader - RFID and POS

RFID / Barcode / Magnet stribe / TAGs / POS

In this overall category you will find a wealth of products and subcategories. Danbit offers for everything from RFID readers Card readers. We stand ready to help you with choices and possible. setup. Looking for something specific, which may be tailored to your job, contact Danbit tel. 56 66 20 20.

In our knowledgebase, you can read more about blah. barcode formats.

RFID / Barcode / Magnet stribe / TAGs / POS

Subcategories

  • Barcode Readers
    <p>See the wide range of barcode readers and accessories. <!-- P--></p> <p>At Danbit we have a large variety of barcode scanners. We have the old 1D scanners, but we also have the newest, blah. our hand scanner to the finger. <!-- p--></p> <p> </p> <p><strong>Handheld <!-- strong--> </strong>is available as a wireless or wired PC or other equipment. Wireless can be RF - own radio frequency, Bluetooth, Zigbee, etc. The wireless usually have a base unit (cradle) connected to the PC or other device and is also charging unit to the handheld scanner. Some scanners have built-in memory for many measurements and can therefore be used outside the radio coverage of the base. When the scanner is placed in the base unit or is within the radio coverage, the scanned data is transferred to the PC. Some scanners can be used only if the one in radio coverage of the base. <!-- P--></p> <p><!-- p--></p> <p> </p> <p><strong>Laser / LED barcode scanner:</strong> <!-- strong--> There are two basic versions. One is with a laser beam (or LED) having a certain frequency, sent from the laser toward the bar code. By means of mirrors, the reflected laser light is sent to a photodiode in læserer. The barcode is read converted and sent to the PC. Scanner with laser light is 1D (barcode) and can often be used where there is a lot of ambient light. <!-- P--></p> <p><!-- p--></p> <p> </p> <p><strong>CCD scanner</strong>: <!-- strong--> Is fitted with a small camera as a reader. It can read 2D and 1D images (QR codes, etc.).<br /> There are pros and cons of scanners with CCD. One advantage is that it can be read 1D, 2D codes, regardless of how the scanner is rotated. It can also read bar codes that are slightly curled. The downside is that CCD scanner may have difficulty reading glossy and highly light-reflective barcodes. CCD scanner is more robust. The slightly more expensive CCD scanners have a faster processor and better detekteringssoftware.<br /> We can help with advice and guidance.<strong><strong><strong> <!-- P--> </strong></strong></strong></p> <p><strong><strong><strong><!-- p--></strong></strong></strong></p>
  • Hand terminal Barcode / RFID
    <p>Advanced Hand Terminal Scanner with many features and applications. Ideal for package delivery where navigation and positioning are informed by scanning the package. GSM function may be used. Used to send text messages to the driver about route changes, or direct conversation between the driver and the control panel. Bluetooth / WLAN is used in output data in the handheld scanner on departure / arrival from / to the center.</p> <p>DANBIT supplies hand terminals across industries. We offer different hand terminals for different industries such as the post office or health care. With a handheld terminal scanner, you have both scanner and computer at your fingertips. Have a question for one of our scanners or didn't find the one you were looking for? So contact us today and we will find the right one for you.</p> <p><!-- P--></p>
  • RFID 125kHz EM standard
  • Mifare RFID 13,56MHz
    <p>Mifare 13.56 MHz RFID technology and main variants</p> <p>The Mifare standard for RFID was originally defined by Philips in 1994 for use in non-contact electronic ticketing and was later described in the ISO / IEC 14443A standard for 13 , 56 MHz non-contact smart cards. Therefore, there is no emphasis on large reading distance, which is typically up to 8 cm using common tags and readers. Mifare is used eg. in the travel card in Denmark. Mifare tags, like tags for the EM standard for 125 KHz, have a unique ID (UID) - but also have built-in memory that is stored in "sectors" in the tag.</p> <p></p> <p>Mifare technology available in several variants. Mifare Classic is provided with 1k or 4k memory organized in sectors. Mifare UltraLight has 512 bytes of memory in sectors - but otherwise works as Mifare Classic. MIfare PRO Works as a "smart card" with CPU and the ability to insert an operating system into the tag, so it's probably the most flexible of the Mifare technologies. In addition, there is a dedicated processor built-in for DES encryption to allow data to be secured against unwanted access.</p> <p></p> <p>Mifare DESFire supports AES encryption as well as DES and 3DES encryption when accessing sector data in the tag. Therefore, data with very high security can be protected against unwanted reading and copying. Works as a "smart card" with cpu and operating system built into a PROM area in the tag optimized for fast reading of data. Can use UID of up to 64 bits.</p>
  • Desfire RFID 13,56MHz
  • UHF Reader / long distance
  • Magnetic stripe Read / Write / Card
  • POS - Point of Sales
  • Dallas iBotton
  • Adapter and Converter

There are 59 products.

Showing 1-12 of 59 item(s)

UHF RFID 860MHz with wire, range 0-10 meters, R/W 512, 128, 96 bit, Gen2 ISO18000-6C, -40 -+100 gr C

Product code: RFID-UHF-TAG-W

UHF RFID 865 - 868MHz waterproof RFID TAG Extremely robust With steel wire closure Cannot be removed from the workpiece when wire is inserted Range from 0 - 10 meters, depending on the reader Goal; 8.8 x 2.8 mm - 28 cm wire Temperature: -40 - + 100°C R/W User memory: 512 bits EPC memory: 128 bits TIME memory: 96 bits ABS + steel wire

Price 196.00 DKK

Fanless 15″ Touch POS Terminal, 2.0GHz, 12VDC

Product code: IPP-POS15

Fanless 4 x COM (DB9, with power output, +5VDC/+12VDC, selectable by Jumper) 2 x COM (Internal, reserved for VFD Customer Display and MSR) 1 x DB25 Parallel Port 5 x USB 2.0 (External, 4 x bottom/ 1 x side) RJ-45 Gigabit LAN VGA 1 x 12VDC (Output) Jack for Customer Display or 2nd Display 1 x RJ-11, +12/+24 VDC (Cash drawer) +12VDC 60W, 4-pin Connector with Lock 355 x 302 x 204 mm

Price 8,511.00 DKK

Payment system with 2 units for contactless card, chip, magnetic stripe and MobilePay

Product code: PAY-N-VPOS+AMIT

Payment system for vending machines, doors etc. Accepts contactless & nbsp; chip, magnetic stripe and MobilePay GSM (SMA) and LAN (RJ-45) 2 x digital outputs. & nbsp; 1 x deaktiveringsindgang. Can be configured to deactivate the machine Can be connected to a vending machine, washing machine, door, etc. Web-based control panel, can be operated over the Internet Support for setup can be purchased Comes with SIM card User agreement with service provider is required

Price 500.00 DKK

Payment terminal with touch display for contactless cards, chip, magnetic stripe and mobilepay

Product code: PAY-N-VPOS-TOUCH

NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase! Payment system with touch display. accept contactless, chip, magnetic stripe and mobilepay. GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine can be connected to a vending machine, washing machine, door, etc. Web-based control panel. Communications Internet or WiFi or 4G Support for setup can be purchased. Supplied with SIM card (4G) Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)

Price 3,999.00 DKK

Pay terminal with touch display for contactless cards and mobilepay, pulse or MDB interface

Product code: PAY-N-ONYX

BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb! Betalingssystem med touch display. All-in-one med POS og Data-kommunikation i samme hus Accepterer kontaktløse kort og MobilePay. GSM antennestik MMCX stik 6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc. 6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl Konfigureres via platform med priser og funktioner Kan tilkobles en salgsautomat, vaskemaskine, dør, osv Web-baseret eller MQTT Cloud Kommunikation: LAN eller 4G Support til opsætning kan tilkøbes. Leveres med SIM kort klar til funktioneopsætning Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)

Price 3,674.00 DKK

RFID reader 125kHz EM400x, waterproof, 8 characters Decimal, USB Powered from USB. With fixed cable outlet at the back.

Product code: RFID-R5USB

Keyboard emulation: 8 decimal places (HID) frequency: 125 kHz EM 4001/4002 Power supply: 5VDC from the USB port Operating temperature: -10 - +75°C  Humidity during operation: waterproof Reading range: 5 ~ 15 cm Cable length: 164 cm Dimension: 118 (L) × 75 (W) x 17 (H) mm Weight: 250g ± 10% wall mounting, water resistant

Price 765.00 DKK

RFID Reader Mifare 13.56MHz Indoor, Hex 8 digits, HID - Keyboard Emulation, USB With Removable USB Cable

Product code: RFID-M5USB-I

Keyboard Emulation: 8 digits, 32bit HEX Frequency: 13,56MHz Mifare Ultra Light versions: Mifare S50, S70, ISO15693, ISO14443A / B UID in positive Normal sequence Power supply: 5VDC from USB port Operating temperature: -10 - + 75 ° C Reading distance: 5 ~ 15 cm Cable length: Solved USB cable Dimension: 118 (L) x 75 (W) x 17 ( H) mm Weight: 250g ± 10% desktop - table model

Price 917.00 DKK

Join Our Newsletter

You may unsubscribe at any moment. For that purpose, please find our contact info in the legal notice.