Distributed I / O Can be controlled via RS485 or Ethernet 10x digital in 10x relay out 9VDC ~ 24VDC power supply (power adapter not included) 16bit / 100MHz CPU 256 KB ROM, 1 MB SDRAM
8 digital contact inputs 8 digital outputs "Open source" from joint terminal RS485 interface DIN bracket screw terminal
8 digital outputs and 4 digital inputs Open Collector Output Photocouple Isolation Digital input channels can be used as 16-bit counters Configurable Power-on Value settings Configurable settings for sure value 3750 Vrms insulation voltage Dual Watchdog Wide operating temperature range: -25 to + 75 ° C
RS485 I / O Module 7 digital inputs - Contact or volt in 8 digital outputs with connect contact function Supply: 10 - 30VDC
RS485 Module with 16 digital outputs 16 x digital outputs, Open Collector Output load: 30VDC / 100mA per Port Common gnd voltage: 10 - 30vdc Your bracket
4 x relay outputs 2 end and 2 switch 4 x insulated inputs supply voltage: 10 - 30vdc 1 x RS485 communication port
RS485 I/O module with 4 digital inputs and 5 relay output 4 x digital input (Wet) active with Volt in digital input as 16 bit counter - 100Hz 5 x relay output - COM, NO Supply: 10 - 30vdc DIN
7 relay outputs (normally open contact) Glavanisk isolated outputs Switching time: ON: 5ms RS485 bus DIN bracket 10 - 30VDC / 1.5Watt
12 connect relays (COM N, O.) RS485 communications bus
8 isolated digital inputs with 16 bit counter RS485 interface -25 ° C ~ + 75 ° C Display DIN rail Screw terminal
RS485 relay box with the display 4 x relay outputs 2 and connect switch 2 4 x isolated inputs Supply 10 to 30 RS485 Communication port 16 bit counter ON Voltage Level: 4 V 30 ~ V OFF Voltage Level: 0 ~ 1 V V Insulation Voltage: 3750 Vrms Input Resistance: 3 kΩ, 0.25 W Dual Watchdog
RS485 module with digital I / O 7 digital input 8 digital output, 30volt / 30mA RS485 interface Baudrate 1200 ~ 115200 bps Dual Watchdog 10 - 30 VDC, 1 W via terminal block -25- + 75 ° DIN rail mounting
