B2B

Business to Business only

- A World of Hardware

Language:

Analogue - mA / Volt

This type of module is primarily used for industrial control, monitoring and remote control. Is very hardy and suitable for external applications where they can be assembled with other type of modules in order to solve a complex task. Is widely used for building automation, factory automation, production machines, energy management etc. Contact DANBIT if you have special wishes and requirements to be met.

Analogue - mA / Volt

Subcategories

There are 43 products.

Sort by:

Showing 13-24 of 43 item(s)

Quick view Add to Comparison Remove from Comparison

Availability:

3 x temperature measurement with PT100, PT1000 sensor and nine RTD elements, 16bit resolution, RS485 bus. 10 - 30vdc.

Product code: M485-ADRTD3-I

Module for PT100 or PT1000 sensor with 4-, 3- or 2-wire for nickel temperature sensor (Ni RTD) 16 bit resolution 15 Measurements per second (Total) Supply voltage: 10 - 30vdc / 1 Watt Master RS485 must establish bias voltage Dim: 123 x 72 x 35 mm

2,828.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

1 x analog output, 0 to +10 volts, 0-20mA, 4-20MA, 12bit, RS485

Product code: M485-DA12-I

Power or Voltage Output 0 - +10VDC, 0 - 20mA, 4 - 20mA Resolution: 12-bit Software Selectable Power or Voltage Output Output Cable Detector for Power Output (4 - 20mA) Backlink Voltage or Current Configurable Power-on Value Configurable Safe Value 3000 VDC Intra Module Isolation Programmable Output Slope Dual Watchdog Temperature Range: -25 to +75°C

1,958.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

4 x analog outputs, +/- 10 volts, 0-20mA, 12bit, RS485 bus

Product code: M485-DA4-I

RS485 module with 4 analog outputs 0-20mA or 0 - +/- 10V D / A response time: 10ms Resolution: 14bit Supply voltage: 10 - 30vdc

2,951.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

16 x voltage measurement or 8 differential inputs +/- 200mV to +/- 10 volts, 16bit. 250kHz Sample Rate. Is connected to USB.

Product code: USB-AD16S16A

16 analog inputs with common ground or 8 differencial inputs. Up to +/- 10 Volt, 250kHz 16 Bit resolution Software Support: LabVIEW, Matlab Software Support : C / C++, Visual Basic, Visual Studio.net Power from the USB port

9,684.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

8 x voltage, current and temperature measurement +/-10V, 0-20mA, TC, 16-bit resolution. 10 measurements per second. USB

Product code: USB-AD8S16

8 analog measuring inputs - up to +/- 10V, 0-20mA Thermocoupler: J, K, T, E, R, S, B, N, C, L, M LDIN43710 USB interface to measure the voltage, current, temperature. up to 10 measurements per second. Screw Terminal

2,616.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

16 x voltage measurement via USB +/- 5V, 12bit, 1 x analog out, 4 x DI, 4 x DO

Product code: USB-AD16S12+

16 analog inputs via USB port, 10-100S / S Resolution: 12 bit Sample-speed: 10Hz per channel 1 Analog output +/- 5V 4 digital outputs TTL ( CMOS 4 digital inputs TTL / CMOS Power supplied from the USB port DAQ Software: Purchase NextView

1,165.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

2 x Analog to Load Cell, +/- 2.5V, 0-20mA, 1 x Excitation like cell, 2x digital zoom, 2 x Digital Output (OC). LAN with PoE

Product code: ETHIO3I4O-P-I

Built-in Web server Web HMI Modbus TCP and Modbus UDP protocols Good communication security Dual Watchdog Operating temperature range: -25 to +75°C I/O pair connection mirrors input to second output 2 x AI to load cell 1 x load cell excitation voltage out 2 x Digital out with counter 2 x Digital out (Open Collector) Supply voltage: 10 - 30VDC / 3watt

3,991.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

7 x inputs for temperature sensors (differential), Pt100, Pt1000, Ni120, CU100, CU1000, 2 x RJ45 LAN, MODBUS, PoE

Product code: ETHIO7RTD-P2I

Built-in Web server Web HMI Modbus TCP and Modbus UDP protocols Good communication security 2 x RJ45 port Ethernet - Daisy chain to the next module Dual Watchdog Operating Temperature Range: -25 to + 75 ° C I / O Pair-connection input is mirrored in the other's output 7 x RTD Interface: Pt100, Pt1000, Ni120, CU100, CU1000 Differentialindgange to the temperature sensor 2 and 3- wire 16bit resolution Power supply: PoE or 10 - 30VDC / 2.5watt PoE is NOT passed on to the next module - only data.

3,814.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

7 x inputs for temperature sensors (differential), Pt100, Pt1000, Ni120, CU100, CU1000, 1 x RJ45 LAN, MODBUS, PoE, 10-30VDC

Product code: ETHIO7RTD-P-I

Built-in Web server Web HMI Modbus TCP and Modbus UDP protocols Good communication security 1 x RJ45 port Ethernet Dual Watchdog Operating temperature range: -25 to + 75 ° C I / O Pair-connection input is mirrored in the other's output 7 x RTD Interface: Pt100, Pt1000, Ni120, CU100, CU1000 Differentialindgange to the temperature sensor, 2 and 3-wire solution 16bit Power supply: PoE or 10 - 30VDC / 2.5watt

2,950.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

6 x Analog Differential input voltage and to mA. 2 x Analog output voltage and mA, 2 x Dig in 2 x Dig out, 1 x RJ45, PoE

Product code: ETHIO8I4O-P-I

Built-in Web server Web HMI Modbus / TCP and Modbus / UDP protocols Good communication security Dual Watchdog Operating temperature range: -25 ~ + 75 ° C I/O Pair-link - the input is mirrored in the other's output 6 x Analog inputs: 500mV +/- - +/- 10 V, 0 - 20mA (16bit) 2 x Analog outputs: 0 - +/- 10VDC, 0 - 20mA (12bit) 10 samples per second 2 x Digital input (count): Wet / Dry, max. + 30VDC (100Hz) 2 x Digital outputs: Open Collector, max. 50VDC / 700mA 1 x RJ45 Ethernet Power supply: PoE or 10 - 30VDC / 4Watt

3,672.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

16 x Voltage measurement +/- 10V 16bit, 2 x analog +/- 10V output, 16bit, 4 x digital I / O for USB

Product code: USB-AD16S16

Multi I / O module for measurement and with USB port 16 Analog inputs, +/- 10V, +/- 5V, +/- 2V, +/- 1V 16 bit resolution frequency Up to 250kHz Total Samplings-Rate 2 Analog Exit +/- 10 Volt 4 Digital Entrance TTL / CMOS 4 Digital Outputs TTL / CMOS 1 Counter Input, 16 Bit Voltage Variety from USB The port Buy DAQ Software: NEXTVIEW Dim: 167 x 113 x 30 mm

4,920.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

125 Ohm resistance to current measurement. Convert 0-20mA loop to voltage for measuring module

Product code: M485-MOD125

125 Ω Shunt resistance, 1 pc. pr. Channel

28.00 DKK

Showing 13-24 of 43 item(s)

Analogue - mA / Volt

Analogue - mA / Volt

Via network

Via network w/PoE

For USB

Via RS485 bus

3 x temperature measurement with PT100, PT1000 sensor and nine RTD elements, 16bit resolution, RS485 bus. 10 - 30vdc.

1 x analog output, 0 to +10 volts, 0-20mA, 4-20MA, 12bit, RS485

4 x analog outputs, +/- 10 volts, 0-20mA, 12bit, RS485 bus

16 x voltage measurement or 8 differential inputs +/- 200mV to +/- 10 volts, 16bit. 250kHz Sample Rate. Is connected to USB.

8 x voltage, current and temperature measurement +/-10V, 0-20mA, TC, 16-bit resolution. 10 measurements per second. USB

16 x voltage measurement via USB +/- 5V, 12bit, 1 x analog out, 4 x DI, 4 x DO

2 x Analog to Load Cell, +/- 2.5V, 0-20mA, 1 x Excitation like cell, 2x digital zoom, 2 x Digital Output (OC). LAN with PoE

7 x inputs for temperature sensors (differential), Pt100, Pt1000, Ni120, CU100, CU1000, 2 x RJ45 LAN, MODBUS, PoE

7 x inputs for temperature sensors (differential), Pt100, Pt1000, Ni120, CU100, CU1000, 1 x RJ45 LAN, MODBUS, PoE, 10-30VDC

6 x Analog Differential input voltage and to mA. 2 x Analog output voltage and mA, 2 x Dig in 2 x Dig out, 1 x RJ45, PoE

16 x Voltage measurement +/- 10V 16bit, 2 x analog +/- 10V output, 16bit, 4 x digital I / O for USB

125 Ohm resistance to current measurement. Convert 0-20mA loop to voltage for measuring module

Information