Data collection and measurement

Data logning / Data collection / Measurement

Monitoring of premises, storage rooms, server rooms, installations, machines, refrigerators, freezers, food shuttles and the like, the DANBIT Datalogger modules are a good choice. Measurement and logging of temperature, humidity, atmospheric pressure, carbon dioxide, voltage or current are all with date and time stamp.

Measurement data can be displayed on a computer as graphs and values and can be exported as a csv file for...

Monitoring of premises, storage rooms, server rooms, installations, machines, refrigerators, freezers, food shuttles and the like, the DANBIT Datalogger modules are a good choice. Measurement and logging of temperature, humidity, atmospheric pressure, carbon dioxide, voltage or current are all with date and time stamp.

Measurement data can be displayed on a computer as graphs and values and can be exported as a csv file for statistical processing and report printing.

DANBIT A / S is a sole distributor of T & D Datalogger of very high quality, from Japan's largest manufacturer of compact units for measuring and recording temperature, moisture, voltage and pulses.

The data logger is battery powered, very robust, waterproof and for installation without cable routing. The data logger can be included in a permanent monitoring system or temporarily placed in a location where monitoring is desired. T & D offers data logger products, where measurement data and graphs can also be displayed on Smartphones.

More Less

Data logning / Data collection / Measurement

Subcategories

  • Wireless data logging /...
    <p>With these data loggers that can be installed almost anywhere, temperature, humidity and voltage can be logged. The LOG-WL500 series can store up to 16,000 measurements, which can be retrieved wirelessly (range up to 150 meters) via the receiver units (LOG-WL500x) and stored on a PC. The measurements are with date and time stamp - can be exported to eg. Excel. Selected models are approved for food in accordance with EN-12830 standard</p>
  • Data Logger LAN / Wifi / BT
    <p><strong>Data Logger with Network <!-- strong--> <!-- p--> </strong></p> <p>Temperature and humidity logger where setup is carried out via the built-in Web interface. Changes can be made over the LAN or Internet. The measured values ​​can be retrieved via the supplied software for further processing. Limits can be set up and if they are exceeded please send email to 5 different addresses.<strong> <!-- P--></strong></p>
  • Datalogger M-Serien
    <p><strong>Temperature, current (0-20mA) and voltage meters with logging</strong></p> <p>Temperature and current and voltage meters, where the measured data is with date and time stamp. Logs without the use of a PC. The logger's parameters scaling, compensation, etc. are set up via the included program - including which intervals to log. After logging in, the device connects to the PC's USB port and data is transferred to the supplied software for graphical display or to be saved as a text or Excel file. Most data loggers are battery powered. Ethernet Servers allow log data to be automatically transferred to the PCs with the DAQ software.</p>
  • USB
    <p><strong>The temperature, humidity and voltage meters with logging <!-- strong--> <!-- p--> </strong></p> <p>The temperature and humidity and voltage meters in which the measured data with date and time stamp. Logger without a PC. The logger's parameters set up by the program - including the intervals to be logged. After completing the logging device connected PC's USB port, and data is transferred to the supplied software for graphical display or to be saved as a text or Excel file. Some data loggers have built-in display that shows the actual temperature and moisture.<strong> <!-- P--></strong></p>
  • Energy metering
    <p>Here are several RMS power meter that takes into account the phase shift that comes with capacitive and inductive loads such. from a motor. Can also be used on plain 230/400 VAC equipment. Software that can display the current consumption and tension. The software may also store the measurements with an adjustable interval. The consumption of the individual phases is read and the total consumption. Good to determine at what stage you should provide to, from a solar plant. Requires knowledge of the MODBUS protocol whose data you want retrieved otherwise. Description of the MODBUS can be found at <a href="http://www.modbus.org/" style="background-color:#ffffff;font-size:14px;">http://www.modbus.org</a><!-- p--></p>
  • Accessories
    <p>See our range of accessories for data loggers, GSM modules or climate alarms. Here you can find temperature sensors with different interfaces, data logger fittings, or software for displaying data from the measured data. See our selection or contact the sales department for more information.</p>
  • T&D Temperatur - / Fugtmåling /...

There are 82 products.

Showing 49-60 of 82 item(s)

8 channel Temperature Data logger for thermocoupler, 20mS sampling time, 16-bit, 8MB of memory, battery power, WiFi, USB

Product code: LOG-MPL-HW

8 channel data logger about Wifi, USB, RS232 16-bit A / D converter in data logger failed With cold-junction temperature compensation to 8 Megabyte memory to log data Wifi, USB and RS232 automatic baud rate up to 115.2kbit Battery operation - 12 year battery , if you acquire: Software for configuration export, plotting, analysis and reporting (not included) Configurable alarm controls measurement speed from 20 milliseconds (1 channel ) to 12 hours Robust aluminum housing coated printed circuit boards for protection against moisture, corrosion Dimensions: 88 x 65 x 24mm Weight: 200 grams

Price 9,737.00 DKK

7 channel 4-20mA current-precision data logger, speed 20ms to 12 hours, 16bit resolution, 4MB of memory, Battery operation, USB

Product code: LOG-MPCB

16-bit 4-20mA to-digital converter Temperature Compensated AD converter to 4 Megabyte memory to log data USB and RS232, automatic baud rate up to 115.2kbit Input ranges (4-20mA version with 0-50mA) Battery operation - 10 year battery , if you acquire: Software for configuring, downloading, graphing, analysis and alarm reporting (not included) Configurable alarm controls / overvoltage control measurement speed from 20 milliseconds ( 1 channel) to 12 hours Robust aluminum housing coated printed circuit board for protection against moisture, corrosion

Price 8,716.00 DKK

Product title

Product code: M485-MBUS-I

RS485 / RS422 / RS232 converter for Meter-Bus meters, actuators, etc. Supports up to 100 Meter-Bus meters (slaves) Selecting the serial port, only one can be selected to be active 2 x Baud rate (M-bus and COM port can be selected at different speeds) Baud rate: 300 to 115,200 bps Transparant data - no protocol conversion M-bus connection is 2-wire , max. 350meter. larger distance up to 5km requires a number of M-bus repeaters Supply voltage: 10 - 30VDC, 1.8 - 12Watt Dimensions: 122 x 72 x 33 mm | Removable terminal blocks Operating temperature: -25 - + 75 ° C DIN bracket Robust plastic housing

Price 2,937.00 DKK

M-BUS to RS232 / RS422 / RS485 MODBUS Master, 2 x Baud rate select. M-Bus standard: A-13757, CJ / T-188, -25 - +60°C

Product code: M485-MBUS-MASTER-I

RS485 / RS422 / RS232 Master Gateway to Meter-Bus Slaves (sensors, actuators, etc.) Supports up to 100 Meter-Bus meters (slaves) MODBUS RTU function codes: 0x03 and 0x04 readdata Selection of serial port, only one can be selected to be active Baud rate x 2 (M-bus and COM port can be selected at different speeds) Baud rate M-bUS: 300-2400 bps Baud rate COM port: 300-115200 bps Transparent data - no protocol conversion M-BUS connection, 2-wire, max. 350meter. Greater distance up to 5km requires a number M-bus repeaters Supply voltage: 10 - 30VDC, 1.8 - 12Watt Dimensions: 122 x 72 x 33 mm Removable terminal blocks Operating temperature: -25 - + 60°C DIN mount  Robust plastic case

Price 3,005.00 DKK

1 channel leak detector RTU MODBUS, RS485, alarm relay, Sensivtiet adjustment. DIN -25 - + 75 ° C 10 - 30VDC 1,5W

Product code: M485-LEAK1-I

1 channel detection of fluid leakage with MODBUS Shutter local alarm of detection of water leakage Acoustic alarm - adjustable RS485 2-wire MODBUS RTU 2 x LED indicators for power and alarm Relay output for alarm for water leakage - 30VDC / 2A Monitor cable for liquid detector Sensor cable can be up to 500 meters Sensitivity is adjustable Supports DCON and Modbus RTU protocols Embedded Dual Watchdog Operating temperature: -25 to + 75 ° C Small form factor with DIN bracket Dimensions: 83 x 70 x 29 mm Operating voltage: 10 - 30VDC

Price 590.00 DKK

PIR motion sensor, temperature and light level program, relay output, M485, Modbus RTU, DCON, 10 - 30VDC. Indoors

Product code: M485-PIRTEMP-I

The motion sensor light detection, temperature sensor for energy management Connects energy management, local-lighting control via RS485 port With powerful built-in relay for simple light activation 250VAC (1500 Watt T8 ) 360 ° motion detection - up to 8 m in diameter and 4 meters height Time delay / Sensitivity is adjustable temperature sensor, - measuring the room temperature or fire alarm Relay output to turn on the light via the PIR / light-strength and temperature sensors RS485 2-wire communication bus DCON and Modbus RTU protocols ceiling surface mounted design Supply voltage: 10 - 30VDC ca. 2W Dimensions: Ø121 x 52 mm | IP20

Price 1,015.00 DKK

Environmental monitoring station, industrial and outdoor. CO2, particle, temperature, humidity. APP, MODBUS RTU/TCP, RJ45, RS485

Product code: ET-CO2MULTI-I

Industrial / outdoor robust environment-measuring station Partikkelstørrelser down from 0.3μm to 10 μm  CO2 0-9999 ppm - electrochemical sensor temperature of -20 - +50°C Humidity of 0 - 100% RH Dewpoint measurement based on the temperature and moisture Up to 180,000 logs with date and time stamps Web-based configuration interface Effective software: iOS APP and Android APP (free) DCON, Modbus RTU / TCP and MQTT protocols RS-485 / Ethernet / PoE Relay output for local alarm or building management Power supply: PoE and 12 - 48VDC ca. 3.5Watt IP43 sealed enclosure (CO2 + temperature sensor) Dimensions: 211 x 130 x 70 mm DIN or wall mounting bracket

Price 7,398.00 DKK

Light, temperature and humidity sensor with RTU MODBUS / TCP, Ethernet, RS485, ceiling-mounting IP20. unit to Energy Management

Product code: ET-LUXMULTI-I

The indoor light-gauge, temperature and humidity sensor 3 in 1 For energy optimization and building automation systems Measuring range of illumination: 0 to 20,000 lux Temperature Range: -20 to + 60 ° C humidity Measuring range: 0 to 100% RH Supports DCON and Modbus RTU / TCP protocols Supports MQTT protocol Ethernet interface With RS485 / RJ45 Ethernet communications interface Relay output - 6 Amp @ 250VAC Power supply: PoE and 10 - 48VDC, ca. 2 Watt Operating temperature: 0 - + 75 ° C web configuration and firmware update via Ethernet Ceiling Mounting

Price 1,500.00 DKK

Environmental monitoring station for industrial and outdoor. CO CO2. Temperature and humidity, APP, RTU MODBUS / TCP, RS485 RJ45

Product code: ET-AIRCOCO2-I

CO2 - CO - temperature - humidity Industrial / outdoor robust environment-measuring station LCD color display CO2 0-9999 ppm - electrochemical sensor temperature of -20 - + 50 ° C, humidity 0 to 100% RH dewpoint measurement based on the temperature and moisture Up to 450,000 logs with date and time stamps Web-based configuration interface APP: iOS APP and Android APP, powerful software DCON, Modbus RTU / TCP and MQTT protocols RS-485 / Ethernet / PoE Relay output for local alarm or building management power supply: PoE and 12 - 48VDC ca. 3.5Watt IP43 sealed enclosure (CO2 + temperature sensor) Dimensions: 211 x 130 x 70 mm DIN or wall mounting bracket

Price 6,813.00 DKK

Environmental monitoring of CO CO2, temperature, humidity. For APP, MODBUS RTU / TCP, RJ45, RS485, alarm

Product code: ET-AIRCOCO2TH-I

CO2 - CO - temperature - humidity measurement of carbon monoxide and carbon dioxide alarm device at high concentration color LCD display with touch CO 9-1000 ppm CO2 0-9999 ppm Electrochemical sensors (NDIR CO2 sensor) temperature of -10 - + 50 ° C, humidity 0 to 100% RH Up to 450,000 logs with date and timestamps APP: iOS APP and Android APP, powerful software DCON, Modbus RTU / TCP and MQTT protocols RS-485 2-wire / Ethernet RJ45 Relay output for local alarm or building management Power supply: PoE and 12 - 48VDC ca. 3.5Watt IP43 sealed enclosure (CO2 + temperature sensor) Dimensions: 114 x 106 x 56 mm DIN or wall mounting bracket

Price 6,062.00 DKK

2 Channel temperature logger -40 - + 110 ° C, Wifi, Bluetooth, USB, 2 external temperature sensors

Product code: LOG-L71

Wireless Temperature Logger with Wifi, Bluetooth Battery operation from 10 days (1 measurement per minute auto-upload) Battery operation up to 1 year (1 measurement per hour auto-upload) Longer battery operation with Bluetooth turned off during logging 2 x 8,000 measurements in memory with Date and time stamp 2 pcs. external thermistor sensors Accuracy: +/- 0.3 ° C at -20 - + 80 ° C, +/- 0.5 ° C up to 110 ° C Measuring solution: 0.1 ° C Sensor response time: approx. 75 seconds Free Cloud service: T&D WebStorage LCD display shows current measurements PC software: tools and presentation included USB port Dimensions: 78 x 58 x 26 mm Battery type: AA Free T&D WebStorage Cloud Service

Price 2,447.00 DKK

Data Logger PC software for collecting log data from LOG Mxxx Data Logger Series. Logging, viewing, processing and alarm

Product code: LOG-SITEVIEW

LOG Data collection program DAQ to LOG Mxxx series Interface: USB, COM port, Ethernet via Server devices Real-Time log view Alarm limit defining processing and export tool < br> Powerful program conversion algorithms Professional graphic display of Log data Supports Windows OS

Price 1,555.00 DKK

Join Our Newsletter

You may unsubscribe at any moment. For that purpose, please find our contact info in the legal notice.