Call us: +45 56 14 34 34

B2B

Business to Business only

- A World of Hardware

Language:

RFID Reader

Subcategories

There are 18 products.

Sort by:

Showing 1-12 of 18 item(s)

Quick view Add to Comparison Remove from Comparison

Availability:

125kHz RFID reader for wall mounting, RS232, Wiegand, 10 digimal), reading distance 0-20cm. 5 - 12vdc preferably linear

Product code: RFID-ER

RFID Reads 125khz Em-Marin Em 4100 64 Bit Manchester Coding 10 digit ASCII RS232 - Only TX and GND Wiegand Interface Reading distance: 0 - 20cm Depending Of tag Supply voltage: 5 - 12VDC Use liniar power supply (not switch mode) interface cable from the back IP67 Goal: 78 x 43 x 15 mm

1,029.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RFID reader EM 125khz. UID is 40 bits, 10 digit ASCII. RS232, Wiegand 26 Bit, LED, Buzzer. Waterproof. 12vdc.

Product code: RFID-R10N

125khz RFID reader for outdoor mounting on wall sealed with hardened epoxy - cable mid rear EM4000 125khz RFID Reader for wall mounting reading distance 0 - 5cm, depending on roof size 40 bit code, 10 digits ASCII (Decimal) RS232, only TX. GND 9600, 0 Start, 8 Data, 1 Stop, Non Parity, FLOW: HW Wiegand 26bit format LED Indicator and Buzzer Control Manager Supply voltage: 12VDC / 200ma Cable length 1 meter (8 Core) Goal: 114 x 46 x 13 mm

947.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RFID Reader 125kHz EM Standard Hex 40bit. 2-wire RS485 half-duplex. Command-controlled from PC. Up to 16 on RS485 bus. 12vdc.

Product code: RFID-R10N85

RS485 Command Controllet Ready / Read Set to Read. Called to Transfer Take UID Code 10 digit Hex - (26 digits for PC) 2-wire RS485 Half-duplex. 125 kHz EM format. 12vdc 0.2a (MDFollows not) Dimensions: 113.5 x 45.6 mm (L X B)

1,225.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RFID reader 125kHz EM400x, waterproof, 8 characters Decimal, USB Powered from USB. With fixed cable outlet at the back.

Product code: RFID-R5USB

Keyboard emulation: 8 decimal places (HID) frequency: 125 kHz EM 4001/4002 Power supply: 5VDC from the USB port Operating temperature: -10 - +75°C Humidity during operation: waterproof Reading range: 5 ~ 15 cm Cable length: 164 cm Dimension: 118 (L) × 75 (W) x 17 (H) mm Weight: 250g ± 10% wall mounting, water resistant

765.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RFID Reader 125kHz EM Round, 40bit HEX, RS232, code is sent to the COM Port Register. 9 - 12VDC.

Product code: RFID-R4

RFID 125kHz reader with RS232 EM 4xxx Standard Tag (40 bit HEX) Mounting in Ø 31 mm Hole Length from Resess: 27 mm Resess Width: 40 mm RS232 , 9600, N, 8, 1 9 - 12VDC / 50mA Temperature: -10 - + 70 ° C Material: PBC IP54 from front

534.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RFID reader 125kHz over network, TCP / UDP. Supports different subnet. TCP server. Reader Config SW - 5VDC

Product code: RFID-RM-ETH

10/100M Ethernet interface TCP Server, UDP, DHCP Til 125Khz ID Kort Forsyning: 5V DC PSU max 300MA

1,290.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RFID reader to 125kHz cards. IP64. RS232 / RS485 / Wiegand 26. Relay output managed from PC. Access Control etc.

Product code: RFID-R60A

RFID reader for RS232 / RS485 / Wiegand IP64 Range up to 60cm Serial communication to / from PC Relay output (24VDC / 2A) Serial Enabled from PC Baud Rate : 9600, 8, n, 1 Dim: 210 x 210 x 28 mm Extended temperature -10 - 60°C supply: DC 12V, 350mA

3,178.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RFID reader/writer 125/134.2 kHz, 13.56MHz to USB

Product code: RFID-MULTI-USB

Frequancy 125 kHz/134.2 kHz (LF) / 13.56 MHz (HF) Read/Write distance up to 100 mm USB Black SDK for writing apps which are executed directly on the reader Firmware update Onboard 18 kB flash storage

3,416.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RFID Duplicator, 125kHz / Mifare/NFC reads / writes with USB interface. Can clone UID to t5577 RW RFID TAG

Product code: RFID-KOPI-USB

RFID Copy Reader / Writes to T5577 RW Tag interface: USB Work voltage: 5 VDC Work current: 200mA Standby Stream: 50mA Normal current: 100mA 125kHz, 13,56MHz Mifare / NFC Compatible with CCID and PC / SC IC / ID Dual Frequency Replication Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card Support UID, Fuid, Cuid, UFUID IC Semi-Encrypted Card, IC Full Encryption Card Dim: 108 (L) x 68 (W) x 12 mm (H)

749.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

IP68 RFID reader, 125kHz / 13.56MHz, Wiegand 26/34, only for Access Controls with Wiegand interface. 12VDC

Product code: RFID-MR-IP68

Waterproof RFID reader only with Wiegand Interface Connect to access controls with Wiegand TAG Type: EM / Mifare Reading distance: 5.8 cm IP68 Frequency: 125kHz / 13,56MHz LED and Buzzer Cable out from the back Detachable Backpiece Supply Voltage: 12VDC Dimensions: 86 x 86 x 22mm

1,691.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RFID reader 125kHz EM400x, indoor - DECIMAL 10 digits, HID - keybord emulation. Powered by the USB. Desktop

Product code: RFID-R5USB-D10

Keyboard emulation: 10 digits, 40bit ASCII Decimal frequency: 125 kHz EM 4001/4002 Power supply: 5VDC from the USB port Operating temperature: -10 - + 75 ° C reading range: 5 ~ 15 cm cable length: solved USB cable Dimension: 118 (L) × 75 (W) x 17 (H) mm Weight: 250g ± 10% Desktop - desktop model

771.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RFID reader 13,56MHz Mifare, Waterproof - HEX 8 digits, 32bit, HID - keybord emulation. Powered by the USB. outdoor model

Product code: RFID-R51EUSB-D8

Keyboard emulation: 8 digits, 32bit Hexadecimal Frequency: 13,56MHz Mifare Ultralight Versions: Mifare S50, S70, ISO15693, ISO14443A / B Power supply: 5VDC from USB port Operating temperature : -10 - + 75 ° C reading range: 5 ~ 15 cm cable: Fixed USB cable on the far side Dimension: 118 (L) × 75 (W) x 17 (H) mm Weight: 250g ± 10% Waterproof - IP67

916.00 DKK

Showing 1-12 of 18 item(s)

RFID Reader

RFID Reader

Network

RS232

RS485

USB

Wiegand

125kHz RFID reader for wall mounting, RS232, Wiegand, 10 digimal), reading distance 0-20cm. 5 - 12vdc preferably linear

RFID reader EM 125khz. UID is 40 bits, 10 digit ASCII. RS232, Wiegand 26 Bit, LED, Buzzer. Waterproof. 12vdc.

RFID Reader 125kHz EM Standard Hex 40bit. 2-wire RS485 half-duplex. Command-controlled from PC. Up to 16 on RS485 bus. 12vdc.

RFID reader 125kHz EM400x, waterproof, 8 characters Decimal, USB Powered from USB. With fixed cable outlet at the back.

RFID Reader 125kHz EM Round, 40bit HEX, RS232, code is sent to the COM Port Register. 9 - 12VDC.

RFID reader 125kHz over network, TCP / UDP. Supports different subnet. TCP server. Reader Config SW - 5VDC

RFID reader to 125kHz cards. IP64. RS232 / RS485 / Wiegand 26. Relay output managed from PC. Access Control etc.

RFID reader/writer 125/134.2 kHz, 13.56MHz to USB

RFID Duplicator, 125kHz / Mifare/NFC reads / writes with USB interface. Can clone UID to t5577 RW RFID TAG

IP68 RFID reader, 125kHz / 13.56MHz, Wiegand 26/34, only for Access Controls with Wiegand interface. 12VDC

RFID reader 125kHz EM400x, indoor - DECIMAL 10 digits, HID - keybord emulation. Powered by the USB. Desktop

RFID reader 13,56MHz Mifare, Waterproof - HEX 8 digits, 32bit, HID - keybord emulation. Powered by the USB. outdoor model

Information