B2B

Business to Business only

- A World of Hardware

Language:

Converter / Amplifier / Insulator

With our wide range of different products, in this category we have converters, amplifiers, insulators. Here you will find interfaces like RS232 / 485/422, or convert from RS232 to RS485 / 422. If you need a specific solution for a larger project, call in and hear our sales department for more information.

Converter / Amplifier / Insulator

Subcategories

Fiber - RS232/422/485
Parallel - Seriel
Profibus - MODBUS
Profibus - RS232/422/485
RS232 - Current loop
RS232 - RS232
RS232 - RS422/485

With one of these converters, you can convert an RS232 signal to RS422 or 485 which is the smallest converter available on the market. Det er en fast og effektiv løsning for fjernrestriktioner. It requires no software and can be easily used. The converter has an auto-built hardware that allows both connected devices to prevent data transmission at the same time. With a DIP switch, you can easily configure the interface for RS232 or RS485. With the RS485 Echo mode, you can make sure that outputs can function as input signals. Therefore, you do not have to read echo data to find out if broken data is being sent.
RS232 - TTL
RS232/422/485 - CANBUS
RS422/485 - RS422/485
Seriel - Parallel
USB - RS232/422/485
Profibus - Ethernet
HART

In this category you will find our selection of HART convert. HART Protocol is an acronym for 'Highway Addressable Remote Transducer' and is an industrial automation protocol. The advantage of using HART is that these devices can communicate over older analog 4-20mA current loops by sharing pairs of wires used for analogue systems. HART seen primarily in process and various automation systems, everything from simple automation applications for advanced industrial applications.

There are 46 products.

Sort by:

Showing 37-46 of 46 item(s)

Quick view Add to Comparison Remove from Comparison

Availability:

RS232 for RS485 converter, 1200m, 115.2kBit / s, 3kV isolation on RS232 side, 10 - 30VDC, -25° - +75°C

Product code: M485-CNV232+I

Optoisolated RS-232 for RS485 converter 3kVDC isolation on RS232 from DC input ESD protection for RS232 / 485 Baud rate 300 bit / s to 115,200 bit / s Supports power inputs of +10 V DC to +30 V DC Operating temperature: -25 ° to + 75 ° C For DIN rail mounting

893.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

Addressable RS485 Convert to 3 x RS232, 1 x RS485 / 422 port. Up to 115.2 Baud, -25 - +75°C

Product code: M485-CNV4RS232

RS485 & nbsp; recoverable RS232 controller / converter Link to 3 x RS232 units from 1 x RS485 bus Baud speed 300 bit/s to 115,200 bit/s 10 V DC to + 30 V DC Dual watchdog 256 KB SRAM buffer 1 x & nbsp; RS485 address per. serial interface Operating temperature: -25 ° to + 75 ° C For DIN rail mounting

2,855.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

Isolated USB to RS485 converter, -25 ° C ~ +75 ° C

Product code: M485-USB-ISO

USB to RS485 converter, isolated 1 x RS485 7-pin terminal block 1 x USB-B Speed: 300 ~ 115200 bps For USB 1.1 / 2.0 (High Speed) 2500 VDC isolation on RS485 side To DIN rail mounting No external power supply required Input +5 VDC from USB port OS support WIN 98 / ME / 2000 / XP (32 / 64- bit) / Vista (32/64-bit) / 7 (32/64-bit) / 8 (32/64-bit) / 10 / Linux Operating temp. -25 ° C ~ +75 ° C USB cable (1.8m) included

992.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RS232 serial booster up to 1.2km via RJ45 point to point cable

Product code: BOOST-RS232-RJ45

Extend the distance between PC and RS232 Equipment Straight through network cable RS232 serial port boost up to 1.2 km Baud rate range: 300 - 200kbps Supply voltage: DC9-24V (not included ) Optical isolation isolation voltage: 2500Vrms pulse or 500 V = continuous Dimensions: 100 mm x 50 mm x 20 mm Weight: 350 g

1,995.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

CAN to RS232 / RS422 / RS485 Convert. Can2.0A / B Master for serial device, scanner and the like. 10 - 30vdc.

Product code: M485-CAN-IA-M

Module to Can 2.0a and B ISO 11898-2 standard Baudrate 10Kbps for 1M bps software for setting CAN and RS232 / 422/485 Transparency between RS-232 / 485/422 Via CAN bus Full duplex on RS-232/422 units are not supported CAN Bus Baud Rate Configuration CAN Accept Filter Configuration CAN 2.0A or 2.0B Specific Choice RS-232 / 485/422 Baud rate and data file setting RS-232/485/422 Respond Options Setting: Normal or pair connection

Call For Price

0.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

RS232/422/485 for single mode fiber converter, ST connector. Baud rate up to 921.6kbps. Up to 40km. 12 - 48VDC.

Product code: CNV-UNI-FIBER-S

Mediekonverter fra seriel til optisk fiber Point til Point transmission RS232 eller RS422 eller RS485 Op til 40 km med single-mode ST stik - duplex Til 9/125my single mode fiber Reducerer signalinterferens Beskytter mod elektrisk interferens Baud rate op til 921,6 kbps Temperaturområde: -40 til+75°C Forsyningsspænding: 12 - 48VDC Mål: 100 x 90 x 22 mm DIN beslag som tilbehør

Call For Price

0.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

Serial Port Sharer/Converter, Modbus RTU/ASCII, Two Masters Share One Slave

Product code: M485-2M-1S

Supports Baud Rate conversion Supports Modbus RTU/ASCII protocol Supports two masters sharing one slave port Raw data mode for most query-response protocols Built-in web server for easy configuration (HTTP) Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack Allows automatic RS-485 direction control Tiny form-factor and low power consumption Read-cache ensures faster response

1,175.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

USB to RS232 adapter - get a COM port on the PC via the USB C port. With 9 pcs. LED indicators

Product code: CNV-USB-RS232+L9

USB A to Straight-Through RS232 serial adapter With DB9 male With 9 x data monitoring LEDs (TX, RX, PWR) COM port assignments are maintained across reboots Max Baud Rate: 921.6 Kbps | 1, 1.5, 2 stop bits Odd, Even, Field, Space, No Parity Mode Hardware Flow Control (CTS/RTS and/or DSR/DTR) Software Flow Control (XON/XOFF) | Chipset: PL2303-GC Compatible with Windows®, Mac OS and Linux

457.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

Optoisoleret RS232 til RS-422/485 konverter m. skrueterminal

Product code: CNV232I485M+

Moxa A53, DB9 W/ADAPTER

789.00 DKK

Quick view Add to Comparison Remove from Comparison

Availability:

USB to RS232 / RS422 / RS485 High-speed Convert up to 921.6 Kbps, 3KV DC isolation

Product code: M485-USB-I-U

High-speed USB to RS232/422/485 converter Supports USB 1.2 / 2.0 / 3.0 3000V DC insulation on RS232 / 422/485 Transmission speed - up to 921.6 kbps RS232 / 422/485 cannot be used simultaneously Supplied via USB port Automatic RS485 Direction Control Temperature range: -25 ° C - + 75 ° C DIN rail mounting Windows 98/ME/2000/XP/Vista (32/64-bit) Windows 7 / 8.1 / 10 (32/64-bit) Win 2012 Linux

1,071.00 DKK

Showing 37-46 of 46 item(s)