Remote control and measurement network or via the GSM module

Remote control / measuring via Ethernet and GSM

Devices that can measure temperature, current or voltage, and act on whether a physical action, an SMS message, or email is required when a given measurement gives rise to it.

Boxes for monitoring and controlling electronic equipment, such as Servers, Routers for example via local and Internet.

Remote control / measuring via Ethernet and GSM

Subcategories

  • Serverrum: Overvågning / Styring
    <p class="MsoNormal">Data center and server room monitoring. Monitoring solutions for data centers and industrial environments. Products include sensors, network devices, and software that allow real-time monitoring and control of various parameters such as temperature, humidity, power, water, and smoke detection. These solutions help ensure the reliable operation of data centers and industrial systems by providing accurate and reliable data for management and operational decisions.</p>
  • Remote control/Measurement/Alarm...
    <p>GSM controllers in this group are well suited for remote monitoring and control of facilities for mobile network equipment, vehicle monitoring, environmental monitoring and food control, etc.</p> <p></p> <p>GSM remote monitoring works over the mobile network . They use 2G and 3G (phase out), GPRS and 4G (LTE) and 5G. GSM controllers are not only used in places without Ethernet connection, but where the connection via the mobile network is mandatory. Several GSM controllers have a built-in WEB server for easy setup, and do not need a special software. Some GSM controllers have MTM protocols such as HTTP record with XML / JSON status files, and HTTP API commands and both data collector and remote control, although they do not have public static IP address.</p> <p><!-- p --></p> <p></p> <p>Some GSM controllers are set up using SMS commands. Some support email client with TLS encryption to send email alert under alarm conditions. Along with emails, the warning can also be sent as standard SMS. GSM controllers have standard analog inputs for DC voltage measurements, as well as digital inputs for contact monitoring and several have 1-Wire interface that supports up to 8 sensors.<br /> Relays can be activated either remotely via SMS or HTTP API or locally.</p> <p></p> <p></p> <p>HTTP content can be sent periodically or at previously set alarm conditions. This is very useful in client-server systems for GSM GPRS remote monitoring and control as part of SCADA computer systems.</p>
  • Remote Control via network / PDU
    <p>In this category you will find remote control units such as GSM modules via networks which can be controlled via sms and devices which can be programmed with relay outputs and much more. Measuring units for e.g. temperature measurement, temperature control in relation to minimum and maximum temperature and much more. See our selection and call our sales / technical department to hear more.</p>

There are 62 products.

Showing 49-60 of 62 item(s)

PDU med HotSwap og reststrømsmåling, 4 x IEC C19 udgange 16A, 4 x IEC C20 strømforsyning 16A, 3 x RJ45,

Product code: PDU-HSW2+4M

4 ports PDU med samlet strømmåler via netværk Med reststrømsmåling type A. 19" rackmontering, 1U Måling af energi og elektriske dimensioner Integreret Hotswap skuffe til udskiftning af processor/strømforsyning under drift Måling af 2 resp. 4 separate faser 4 x IEC C13 udgange 14A  3 x RJ45, LAN og Sensor 4 x IEC C20 Strømforsyning 16A SNMP Get/traps 

Price 8,755.00 DKK

Automatisk transfer switch (ATS), 6 x IEC C13, 1 x IEC C19, 3 x RJ45

Product code: SW-BPASS6A

automatisk transfer switch (ATS) til skifte til en alternativ strømforsyning Typisk overførselstid 7 - 10 ms. Brugerflade via web-browser med Password Programmerbar sekventiel power up 6 x IEC C13 udgange 10A  1 x IEC C19 16A 3 x RJ45, LAN og Sensor 2 x IEC C20 16A strømforsyning SNMP Get/traps og e-mail support

Price 8,363.00 DKK

ETH remote control over network. 4 x on / off outputs, 12 x passive input, 4 x RJ45

Product code: ETH-TEMP-2111

The ideal choice for Server Room and Server rack monitoring. 4 x potential-free switching relay outputs - 36VDC / 3A switches Large LED display for power measurement, IP address, sensor data and error reports 4 x Watchdog for monitoring connected PCs (ICMP / TCP) 12 x passive signal inputs - (contact inputs) for Phoenix plugs 4 x RJ45 for temperature / humidity sensors. RS232 / 485, 1 x RJ45 for LAN Features, limit values, alarm receivers set up on the device via supplied software 2 x 12VDC power supply inputs (redundant) PoE - Power over Ethernet for 2111-2 the model. Free APP for Android and iPhone SNMP Get / Traps (SNMPv1, v2c, v3)

Price 4,723.00 DKK

Advanced remote monitoring and control over networks. 1 x sensor input, 4 x relay outputs, 8 x contact inputs. Watchdog

Product code: ETH-TEMP-2302

4 x potential-free shutter release, & 230VAC / 16 A, & 24VDC / 10 A 8 x passive signal inputs - contact inputs 1 x RJ45 Ethernet 4 x Watchdog to monitor connected devices (ICMP / TCP) 1 Mini-DIN connector for optional sensor or serial interface (RS232) Programmable on / off sequence SNMP Get / Traps (SNMPv1, SNMPv2c), Syslog, e -mail APP for Android and iPhone 2-color LEDs for status info on front DIN rail mounting

Price 2,500.00 DKK

ETH, Fjernstyring over netværk, 3 x tænd/sluk relæ udgange, 1 x RJ45 Ethernet

Product code: ETH-TEMP-23121

3 x tænd/sluk, potentialfri relæ ouputs, 230 V AC, 16 A / 24 V DC, 10 A 1 x strømforsyning med 12-24 V AC / DC spænding 1 x RJ45 Ethernet 3 x Watvhdog til at overvåge forbrugere (ICMP / TCP) 1 Mini-DIN-stik til valgfri sensor eller seriel interface (RS232) Programmerbar tænd / sluk-sekvens SNMP Get/Traps (SNMPv1, SNMPv2c) Understøtter Android og iPhone Syslog og E-mail DIN-rail montering i servere racks

Price 4,877.00 DKK

1 channel leak detector RTU MODBUS, RS485, alarm relay, Sensivtiet adjustment. DIN -25 - + 75 ° C 10 - 30VDC 1,5W

Product code: M485-LEAK1-I

1 channel detection of fluid leakage with MODBUS Shutter local alarm of detection of water leakage Acoustic alarm - adjustable RS485 2-wire MODBUS RTU 2 x LED indicators for power and alarm Relay output for alarm for water leakage - 30VDC / 2A Monitor cable for liquid detector Sensor cable can be up to 500 meters Sensitivity is adjustable Supports DCON and Modbus RTU protocols Embedded Dual Watchdog Operating temperature: -25 to + 75 ° C Small form factor with DIN bracket Dimensions: 83 x 70 x 29 mm Operating voltage: 10 - 30VDC

Price 590.00 DKK

Environmental monitoring station, industrial and outdoor. CO2, particle, temperature, humidity. APP, MODBUS RTU/TCP, RJ45, RS485

Product code: ET-CO2MULTI-I

Industrial / outdoor robust environment-measuring station Partikkelstørrelser down from 0.3μm to 10 μm  CO2 0-9999 ppm - electrochemical sensor temperature of -20 - +50°C Humidity of 0 - 100% RH Dewpoint measurement based on the temperature and moisture Up to 180,000 logs with date and time stamps Web-based configuration interface Effective software: iOS APP and Android APP (free) DCON, Modbus RTU / TCP and MQTT protocols RS-485 / Ethernet / PoE Relay output for local alarm or building management Power supply: PoE and 12 - 48VDC ca. 3.5Watt IP43 sealed enclosure (CO2 + temperature sensor) Dimensions: 211 x 130 x 70 mm DIN or wall mounting bracket

Price 7,398.00 DKK

Light, temperature and humidity sensor with RTU MODBUS / TCP, Ethernet, RS485, ceiling-mounting IP20. unit to Energy Management

Product code: ET-LUXMULTI-I

The indoor light-gauge, temperature and humidity sensor 3 in 1 For energy optimization and building automation systems Measuring range of illumination: 0 to 20,000 lux Temperature Range: -20 to + 60 ° C humidity Measuring range: 0 to 100% RH Supports DCON and Modbus RTU / TCP protocols Supports MQTT protocol Ethernet interface With RS485 / RJ45 Ethernet communications interface Relay output - 6 Amp @ 250VAC Power supply: PoE and 10 - 48VDC, ca. 2 Watt Operating temperature: 0 - + 75 ° C web configuration and firmware update via Ethernet Ceiling Mounting

Price 1,500.00 DKK

Environmental monitoring station for industrial and outdoor. CO CO2. Temperature and humidity, APP, RTU MODBUS / TCP, RS485 RJ45

Product code: ET-AIRCOCO2-I

CO2 - CO - temperature - humidity Industrial / outdoor robust environment-measuring station LCD color display CO2 0-9999 ppm - electrochemical sensor temperature of -20 - + 50 ° C, humidity 0 to 100% RH dewpoint measurement based on the temperature and moisture Up to 450,000 logs with date and time stamps Web-based configuration interface APP: iOS APP and Android APP, powerful software DCON, Modbus RTU / TCP and MQTT protocols RS-485 / Ethernet / PoE Relay output for local alarm or building management power supply: PoE and 12 - 48VDC ca. 3.5Watt IP43 sealed enclosure (CO2 + temperature sensor) Dimensions: 211 x 130 x 70 mm DIN or wall mounting bracket

Price 6,813.00 DKK

Join Our Newsletter

You may unsubscribe at any moment. For that purpose, please find our contact info in the legal notice.