Remote control and measurement network or via the GSM module

Remote control / measuring via Ethernet and GSM

Devices that can measure temperature, current or voltage, and act on whether a physical action, an SMS message, or email is required when a given measurement gives rise to it.

Boxes for monitoring and controlling electronic equipment, such as Servers, Routers for example via local and Internet.

Remote control / measuring via Ethernet and GSM

Subcategories

  • Serverrum: Overvågning / Styring
    <p class="MsoNormal">Data center and server room monitoring. Monitoring solutions for data centers and industrial environments. Products include sensors, network devices, and software that allow real-time monitoring and control of various parameters such as temperature, humidity, power, water, and smoke detection. These solutions help ensure the reliable operation of data centers and industrial systems by providing accurate and reliable data for management and operational decisions.</p>
  • Remote control/Measurement/Alarm...
    <p>GSM controllers in this group are well suited for remote monitoring and control of facilities for mobile network equipment, vehicle monitoring, environmental monitoring and food control, etc.</p> <p></p> <p>GSM remote monitoring works over the mobile network . They use 2G and 3G (phase out), GPRS and 4G (LTE) and 5G. GSM controllers are not only used in places without Ethernet connection, but where the connection via the mobile network is mandatory. Several GSM controllers have a built-in WEB server for easy setup, and do not need a special software. Some GSM controllers have MTM protocols such as HTTP record with XML / JSON status files, and HTTP API commands and both data collector and remote control, although they do not have public static IP address.</p> <p><!-- p --></p> <p></p> <p>Some GSM controllers are set up using SMS commands. Some support email client with TLS encryption to send email alert under alarm conditions. Along with emails, the warning can also be sent as standard SMS. GSM controllers have standard analog inputs for DC voltage measurements, as well as digital inputs for contact monitoring and several have 1-Wire interface that supports up to 8 sensors.<br /> Relays can be activated either remotely via SMS or HTTP API or locally.</p> <p></p> <p></p> <p>HTTP content can be sent periodically or at previously set alarm conditions. This is very useful in client-server systems for GSM GPRS remote monitoring and control as part of SCADA computer systems.</p>
  • Remote Control via network / PDU
    <p>In this category you will find remote control units such as GSM modules via networks which can be controlled via sms and devices which can be programmed with relay outputs and much more. Measuring units for e.g. temperature measurement, temperature control in relation to minimum and maximum temperature and much more. See our selection and call our sales / technical department to hear more.</p>

There are 62 products.

Showing 1-12 of 62 item(s)

4G Global LTE alarm and remote control, Input: 2 x Digital, 2 x Analogue, 2 x Relay output, 1-wire for sensors, MQTT, 8 - 32VDC

Product code: TCG120-4G

GSM/LTE alarm - 4G - Global version Supports all LTE frequencies Configuration via USB (Windows program) or SMS 2 x digital inputs with "dry contact" or "logic level" mode 2 x analogue input from 0 to 60VDC, 10 bits 2 x relay output with NO/NC contacts 1-Wire interface for 4 Teracom temperature and humidity sensors Input can be navigated with alarm text etc. SMS alarm - up to 5 numbers Email alarm - up to 5 email recipients, SMTP with TLS support 1 relay can be activated with calls from up to 100 phone numbers Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup. MQTT 3.1.1 support Firmware update "on air" Supply voltage: 8 - 32VDC, 2Watt - purchase PSU Dimensions: 109 x 65 x 32 mm Weight: 152g

Price 2,730.00 DKK

4G Global LTE alarm and remote control, M2M, Datalogger, I/O with Digital and Analogue, 1-wire, Relay, MODBUS, 12 - 24VDC

Product code: TCG140-4G

Global 4G LTE Controller, logger and alarm Supports all LTE frequencies Setup via USB, SMS and HTTP API USB setup - use USB cable with Mini B male 2 digital "dry contacts". High on contact 2 analog inputs, 0 - 10VDC or 4-20mA input (10bit) 4 relay outputs, COM, NO and NC 1-Wire input for up to 8 Teracom sensors 1 x RS485 for max. 8 MODBUS RTU sensors Data logger with 70,000 logs Upload data to HTTP/HTTPS Post in XML/JSON SMS alarm and Email alarm to 5 recipients Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup. 10 to 28VDC, 370mA @ 12VDC - additional PSU Dimensions: 158 x 119 x 34 mm Weight: 470g Temperature: -20 - +55°C

Price 3,864.00 DKK

8 Ways Smart PDU

Product code: PDU-LIV-0816

8 power output, the total current 16A;  Current and voltage (total input) measurement; Built in temperature and humidity sensor to monitor the use environment of the equipment; Embedded technology, support Java, web browsing; Two level values of warning and overload can be set; Setting the power on delay time of each circuit can effectively prevent the impact of current surge on the power supply system; LED indicates the power supply status of each switch; LED digital display shows the current voltage and current values; Provide local operation query button of PDU device; Built in lightning protection circuit, anti voltage surge circuit, effective protection of the server;  

Call For Price

Price 0.00 DKK

Programmable Industrial IoT Controller with 1 digital input and 1 digital output, 2 COM ports

Product code: RPI-CM4-IOT

CPU QuadCore Cortex A72 (ARM v8) 64 bits SoC 1.5GHz RAM 4GB  LPDDR4 standad (1/2/8 optional) 32GB EMMC Flash Memory 1x Micro HDMI 2x USB 3.0, 2x COM (1x RS-232/422/485, 1x RS-232/485 ) RTC : Real Time Clock 1x D igital Input Dry (open/close) /Wet( 0-3V/10-30V ) contact 1x Digital Ouput ( 120VAC @0.5A, 240VAC @0.25A, 30VDC @1A) DC 9~32V input DC Jack or Terminal Input

Price 5,933.00 DKK

4G LTE alarm and remote control, M2M, IOT, data logger, I/O with digital and analog, relay, Modbus, 12 - 24VDC

Product code: TCG140-4E

Multi-band 4G LTE Cat.1 Controller, logger and alarm Setup via USB, SMS and HTTP API 2 digital "Dry Contact". High on contact 2 analog inputs, 0 - 10VDC - can be changed to 4-20mA input 2 analog inputs, 0 -10VDC or 0-20mA, 10bit (web control) 4 Relay outputs, COM, NO and NC 1-wire input for up to 8 Teracom sensors RS485 for max. 8 Modbus RTU sensors Data logger with memory for 70,000 logs Upload data for HTTP / HTTPS Post in XML / JSON SMS Alarm for max. 5 recipients Email Alarm for max. 5 recipients Control of relay output from call 10 to 28VDC, 370MA @ 12VDC - Buy PSU Dim: 158 x 119 x 34 mm Weight: 470g Temperature: -20 - +55°C

Price 2,888.00 DKK

8 Channel PDU with 8 x IEC C13 Lockable outputs. 1 x IEC C20 16A input. ON / OFF, MONITORING, EXT. SENSOR INPUT, RJ45

Product code: NPOWER8IEC-SM

Intelligent 8 ports Power Distribution Unit Justerbar sekventiel tænd / sluk Samlet strømovervågning Samlet spændingsindgang Outputovervågning Total brugt kWh Effektfaktorgenkendelse Driftstemperatur: Op til +55°C 8 x låsbar IEC-C13 netudtag 120 - 240VAC Styr op til 3 PDU slaver fra en master 1 x C20 16Amp Sensor for temperatur- og fugtighedsalarm Alarm for vand via infrarød sensor Røgdetektor Automatiske alarmmeddelelser

Price 11,880.00 DKK

GSM alarm with SMS. Battery backup. 2 x digital inputs, 2 x relay outputs. Versions from 2G to 4G. 9 - 36VDC.

Product code: GSM-ALARM130-K

2 x digital input, compatible dry contact and wet contact, supports EOL connection; 2 x relay outputs (240vac @ 3A) The one relay output can be switched on / off by sending an SMS text The second relay output can be turned on for 4 minutes if inputs are activated support input status, external power failure alarm via SMS texts; 9 ~ 36VDC Foprsyningsput and power source output for external device Up to 3 users can receive alarm And daily report SMS Up to 5 users can receive alarm calls; Free SMS APP Rechargeable backup battery and power monitoring alarm Metal cabinet, IP30 Operating temperature: -10 - +70°C Dim: 70 x 88 x 30 mm wall installation and DIN

Price 1,422.00 DKK

Product title

Product code: TCG120-4E

GSM/LTE alarm - 4G Konfigurering via USB (Windows program) or SMS 2 x digital inputs med ”dry contact” eller “logic level” mode 2 x analog input fra 0 til 60VDC 2 x relæ output med NO/NC kontakter 1-Wire interface til 4 Teracom temperature og fugt følere Input fra enheder kan navgives med alarm-tekst mm. SMS alarm - op til 5 numre Email alarm - op til 5 e-mail modtagere, SMTP med TLS support 1 relæ kan aktiveres med opkald fra op til 100 telefonnumre Push mode – XML data sendes via HTTP Post til en remote server HTTP API kommandoer Firmware update "on air" Forsyningsspænding: 8 - 32VDC, 2Watt - tilkøb PSU Mål: 107 x 72 x 32 mm Vægt: 130g

Price 2,323.00 DKK

GSM Controller with 2 x current relay, 2 x Power MOS output, 2 x AI, 4 x DI, 8 x Temp. Bat backup. 230 VAC

Product code: GSM-IO-EN-F+

2 x 230VAC power relay /16A – resistive load. 2 x DC switched outputs up to 40VDC/6A, also as PWM for LED, FAN, etc. 2 x independent inputs: 230VAC and up to 24VAC/24VDC, SMS alerts for power failure SIM card and SD card Backup battery (not included) as an option – Li-Ion 3.7V (14500) Switch appliances on and off with SMS messages GPRS M2M function, TCP/IP Get to directly send input status to Server Get XML status from server to set device outputs. Scheduled automatic switching on and off of appliances Sends power failure warning and recovery. Restarting appliances, such as servers. Monitoring of 2 x A/D inputs AC/DC voltages with autodetect 4 x digital inputs DIN1, DIN2, DIN3, DIN4 for DC voltage. Universal bus (1-wire) for temperature and humidity sensors.

Price 2,264.00 DKK

1 port PDU with on/off and power measurement over the network. Auto-reset of equipment. Scheduled management. IEC13/14

Product code: NPOWER1IEC+A

Event and schedule controlled switching 230VAC/10A Accurate current measurement Input for 2 sensors - temp/humidity, pressure RJ45 to Ethernet NTP function Power port on/off via HTTP(S), SNMP, ModbusTCP, Telnet, SSH, MQTT 1-channel watchdog Power port assigned to Watchdog (ICMP/TCP), auto reboot starts Power consumption measurement (kwH) with 2 energy counters: one counter counts consistently, the other counter can be reset Measurement of current (A), voltage (V), active power (W), apparent power (VA) and reactive power (VAr) Measurement of differential current type A (mA) Dimensions: 120 x 65 x 53 mm

Price 3,227.00 DKK

Join Our Newsletter

You may unsubscribe at any moment. For that purpose, please find our contact info in the legal notice.