Subcategories
8 digitale ind- og udgange Udvidelsesmoduler til L-CON-LOG serien
8 digitale isolerede ind- og udgange Udvidelsesmoduler til L-CON-LOG serien
18 Pin male Connector
The logger / controller with socket for internal I/O expansion bus (eg. Relay module) is programmed with simple logic functions IF-THEN-ELSE, AND and OR simplifies the setup supports SNMP, SMTP , FTP, Modbus RTU and DCON Ethernet 10/100/1000Mbit setup via the integrated Web server 2 x RS232 ports 2 x RS485 ports
Multifunction concealed board with 4 x AI, AO x 2, 4 x DI, 4 XDO individual channel configuration Jumper selectable voltage- or current input Broken kabeldetektion by current measurement Configurable settings for the initial value digital input channels can be used as 32-bit counters 120 VDC surge protection to the analog input 60 VDC surge protection for digital input Overload protection for digital output Short circuit protection for digital output
Measures: -20 ~ + 60 ° C and 0 ~ 100% RH Accuracy: ± 0.4 ° C; ± 3.0% RH LCD display shows the temperature, humidity, dewpoint and module ID 10 ~ 30 VDC power input IP66 Waterproof Data Logger Memory for temperature and 4,088 humidity records RS-485 communication interface DCON or Modbus RTU
Built-in Web server Logical functions with IF-THEN-ELSE setting IF-THEN-ELSE for simple set of conditions No more programming. Just click and finished Supports I / O, counter, timer, calendar, e-mail, rules Data Logger and data files supported rewind feature Modbus TCP / RTU protocol for SCADA software seamless integration I/O-Board XW with inputs and outputs Supports I-7000 Remote I / O modules (up to 16) Supports Modbus RTU slave units (up to 10) SNTP time synchronization supported Support SMS (GSM: Quad-band 850/900/1800/1900 MHz) Supply voltage: 12 - 48VDC
The logger / controller with socket for internal I / O expansion bus (eg. Relay module) is programmed with simple logic functions IF-THEN-ELSE, AND and OR simplifies the setup supports SNMP, SMTP , FTP, Modbus RTU and DCON Ethernet 10/100 / 1000Mbit setup via the integrated Web server 1 x RS232 ports 1 x RS485 ports Supply voltage: 12 - 48VDC
Insert module for L-Con log series 4 x differential analog inputs 4 - 20mA or 8 single-ended analog inputs 4 - 20mA Resolution: 12bit Sample Rate: 4khz 2 x Analog Output 4 - 20mA Resolution: 12bit 3 x Digital Input (DRY) - Contact to GND 3 x Digital Outout (Open Collector) + 40VDC / 200mA per port Dim: 82 x 66 x 13 mm with screw terminal block
The integration module with screw terminal 8 x digital inputs 0 - + 50VDC All inputs with 32 bit counter (50 Hz) 8 x digital outputs, the Open Collector + 50VDC 700mA / channel
Built-in module with screw terminals 5 x digital inputs, Wet Sink / source. 0 - + 50VDC All inputs are with 32bit counter 2 x relay outputs 30VDC / 2A to 4 x 35 VDC relay outputs 6A, 6A Relays 250VAC is non-inductive load
Advanced Controller with logging With slot for internal I/O expansion module, A/D, D/A, D/I, D/O, relay Program with simple logic functions - WISE (Web Inside Smart Engine) Logic functions with IF-THEN-ELSE logic Supports SNMP, SMTP, FTP, MQTT, Modbus / TCP / RTU and DCON Ethernet 10/100 / 1000Mbit Setup via the built-in Web server 1 x RS232 port 2 x RS485 port Supply voltage: 12 - 48VDC
