Language:
1000VA/600W UPS power supply, incl. 2 pcs. 12V/7Ah battery, line-interactive, on time 2-6 ms, Simulated sine curve
Product code: UPS1000I
To prevent loss of data during power failure. Alarm low battery and over-voltage, etc.
UPS1000I is a compact UPS to protect your equipment from nedbrus and data loss in case of power failure. UPS provides power for several minutes, depending on power consumption:
It provides comprehensive protection in a small and economical package. Not only provides more comprehensive power protection against surges and noise on netlinjen filtered and give it a clean voltage by means of the built-in stabilizer AVR (automatic voltage stabilizer). UPS continues for clean and stable power to connected equipment while it is embedded microprocessor controller guarantees high reliability, perfect for any application for home or small office.
not connect the printer or scanner to the UPS as they can be destroyed by modified sine wave power supply.
Estimated backup time, by the following load in%: 25%
provides up to 18 minutes
50% for up to 3 minutes 75%
provides up to 10 Sekunde < p> Rev: LO
UPS1000I
1 Item
Data sheet
- Driftstemperatur
- 0 - +40°C
- Batteri
- 2 stk. 12V/7Ah
- Mål og vægt
- 320 x 182 x 130 mm, 8,2 kg med batteri
- Udgangsspænding
- 230VAC / 50Hz modificeret sinuskurve
- Kapacitet
- 600Watt / 1000VA
To prevent loss of data during power failure
Compact Tower UPS 1000VA / 600Watt
Output voltage: 230VAC / 50Hz
Line-interactive means switching at power failure (2-6ms)
Nødforsynings time: 25% load for about 18 minutes
Noise level: Less than 40 dbA at 1 meter
Modified sine wave (staircase curve)
4-6 hour recharge time to 90% capacity
Auto restart on mains supply restored
Supports automatic shutdown via software download USB and RJ45 port, touch display
Battery: 2 pcs. 12V / 7Ah - see manual for life
Not suitable for printers and scanners
Dimensions: 320 x 182 x 130 mm
Weight with battery: 8.2 kg
Operating temperature: 0 - + 40 ° C